Industrial and Production Engineering

About Department

Industrial and Production Engineering Department came into existence in the year 1980 under the umbrella of JSS Mahavidyapeetha. It became a grant-in-aid department in the year 1983. Ever since its inception, the department has grown from strength to strength over the years in terms of intake of students. The program was started in 1980. The department has an intake of over 60 students. The department has a highly qualified, dedicated faculty team. The department has very good infrastructure facilities. The department has highly sophisticated laboratories Viz. CAD/ CAM laboratory, Software Applications laboratory, Metrology laboratory, Industrial Engineering laboratory cater to carry out academic and research activities. Till date, the department has produced 10 PhDs and 9 research scholars are pursuing Ph.D. The department has been accredited three times by the National Board of Accreditation (NBA). The department has produced distinguished alumni over the years who are holding top positions in organizations and have brought laurel to the institution. The students’ placement record is excellent over the years. Students have placed in esteemed organizations Viz. Mercedes Benz, Toyota, Robert Bosch, TVS, RR Donnelley, Schneider Electric, TCS, and Accenture etc. Department is constantly encouraging students to attend internship programs in reputed companies and to participate in extracurricular activities as well. Students are also encouraged to do innovative projects by the department. Some of the projects carried out by the students like PACE have received international acclaim and won prizes to the department. The Department has been awarded with AICTE MODROB grant of Rs. 11,00,000/- for modernization of Computer Aided Design Laboratory. Under this scheme Department has procured UGS-NX suite.

Message From HOD

I&PE Department was started in the year 1980 with an intake of 40. Now the Department has an intake of 60 for B.E. Degree, intake was increased from 40 to 60 in the year 2003. Department has highly qualified faculty and experienced staff members. Ever since its inception, the department has grown from strength to strength over the years in terms of increase in placement, active participation in various forums, conferences etc. The department has given lot of emphasis on learning Advanced Manufacturing Technology to narrow the gap of industry and institute. All the department labs are well furnished with advanced instruments, devices & software.

The placement of the student is quite impressive reaching to the tune of around 70%. 10% of the students are opting for higher studies in various parts of the globe for post-graduation. Students have placed in esteemed organizations Viz. Mercedes Benz, Toyota, Robert Bosch, TVS, RR Donnelley, Schneider Electric, TCS, and Accenture etc. Department has been granted with Rs. 11,00,000/- (2019-2021) under AICTE MODROBS scheme to modernize the Computer Laboratory. Computer Aided Design/Manufacturing laboratory is now equipped with advanced version of UG-NX software which is useful for students to learn design concepts. Presently six faculty members hold PhD degree in various thrust areas of Industrial and Production Engineering domain.

The curriculum of the Department is very well balanced with courses in the core Mechanical & Production Engineering as well as Techno-management areas. Department of Industrial and Production Engineering is involved in international forum called IDEEA – International Design and Engineering Education Association, IDEEA is a non-profit organization of institutions. More than 20 universities worldwide team up to create a unique educational experience for engineering and design students. Following the long and successful tradition of PACE (Partners for the Advancement of Collaborative Engineering Education), IDEEA hosts annual forums to provide a platform for academia, students and industry to meet, exchange ideas, foster collaboration and make new friendships. Scientific presentations on cutting edge research and education build an essential part of the “IDEEA Forum”. But even more important: It is the event to showcase the outcome and process of the IDEEA Global Collaborative Project. International and interdisciplinary student teams present their product concepts – virtually and physically. They use an additional pre-conference phase to work together in labs and to meet after several months of online collaboration. Each year the Forum takes place at a different member institution. In 2019, the IDEEA Forum was held at Tec de Monterrey, Mexico.

Dr. V Ramesh

Professor and Head of Department

Email: rameshv@jssstuniv.in

Phone: 9986304191.

Vision

To be reputed globally by imparting quality technical education through in-depth knowledge, professional ethics and social responsibilities for the betterment of the society.
To create a state-of-the-art facility to promote academic, research and professional activities for teaching and student communities.

To provide opportunities for students to launch their career in specialized areas of research that caters for the needs of the Industry community.

Mission

To design the program curriculum to cater to the needs of rapid technological advancement.
To upgrade the infrastructure and laboratory facilities in tune with the curriculum requirements.
To build a close liaison with the industries for in-house theory and practical training to the teaching and student fraternities in order to enhance their skills and knowledge in the areas of Industrial Engineering, Manufacturing and Management.

Department Highlights

The Department of Industrial and Production Engineering was started in the year 1980 and it received the Grant in Aid in the year 1987.
The Department has consistent admission of more than 80% from its inception.
The department has tie-ups with Industries like TVS, Mercedes Benz, Toyota, Automotive Axle etc., where our students do their internships and projects.
Mercedes Benz provides a Scholarship of Rs. 1, 00,000 to our female students who will clear their written exam and also it offers them internships and Jobs.
The Department was successful in receiving 11 lakh Rupees Grant from AICTE under the ‘Modernisation and Removal of Obsolescence in the Laboratories’ Scheme in 2019-21.
Faculty of our Department have successfully produced Six Ph.Ds in the last three years.
The Departmental faculty have chaired Conferences, delivered talks in other institutions and have been the reviewers of reputed Scopus Indexed International Journals.
The department faculty have mentored students to participate in International Competitions like PACE, IDEEA and ICAMES.
Department faculty have published research articles in reputed Journals, presented papers in conferences and authored books and book chapters.
Department faculty have organized various workshops and seminars to the students and FDP’s to the faculty to upgrade the skills and knowledge.
Department faculty has done Consultancy Projects in the area of Energy Auditing.
The Department has very good placement record with our students getting placed in industries like Mercedes Benz, Toyota, TITAN, Infosys, TE Connectivity, Bosch, Accenture, Cognizant, DXC, Blue Yonder etc., .
The students have won prizes in international competitions like PACE, IDEEA, JC Aero Design and bought laurels to our department and the institution.
Students have co-authored many research papers with the faculty and presented papers in the conferences.
I&PE students have pursued higher studies in overseas Universities like Columbia University, Brunel University, Texas A&M, Rutgers and also Indian institutions like NITK Surathkal.
Our students have become GM’s, CEO’s, MD’s, Directors, Vice President’s and Presidents of fortune 500 companies like Toyota, Benz, BEML, Bosch & many have become entrepreneurs

Thrust Areas

The Industrial and Production Engineering domain is broadly classified into:

Sl. no.	Domain
1.	Production and Manufacturing Management
2.	Engineering Management
3.	Engineering Design
4.	Industrial Engineering
5.	Materials Science

The faculty members of the department are working in the following thrust areas of the said domains:

Manufacturing Management, Lean Manufacturing & Agile Manufacturing.
Composite Material, Glass Reinforced Polymer
Manufacturing Technology and Composite Materials
Product Design, Manufacturing and Total Productive Maintenance.
Production Engineering & Manufacturing Management
Industrial and Organizational Psychology, Human factors Engineering.
Energy Management, Lean Manufacturing

Strategic plan

Short term plan

Establishing more industry linkages and having MOUs with reputed industries and research establishments.
Incorporating NEP in curriculum
Connecting the students to alumni network for informational interviews & other opportunities.
Inviting industry personnel on regular basis to deliver talk or to have informal interactions for knowledge sharing.
To offer open electives to the University students.

Long Term Plan

Launching of Post-graduation M. Tech Programme

Department of I&PE has submitted a proposal to JSS Science & Technology University to start a M. Tech program with the title “Industrial & Systems Design”

Training Programmes Planned

Faculty Development Program on ‘Design Thinking and Innovation Work Bench’
Student Development Program on ‘Ergonomic Analysis Using Work Pro’.
Training for Diploma students on CNC simulation using CADEM Software for Fanuc A System (Periodic training)
Training for Diploma Students on ‘Lean & Agile and Problem-Solving Techniques in Engineering Practice’ (Periodic training).

III. AICTE Project – MODROBS project execution

I&PE Dept. is sanctioned with Rs. 11 Lakhs under MODROBS scheme of AICTE, New Delhi. I&PE Department is imparting training to students using the UG NX latest version software for third year students which is helping the students to learn the design concepts using latest features of the software.
Department is planning to have advanced training program on UG-NX for faculty and students of other university under SDP/FDP theme.
Facility Up gradation and Maintenance
AICTE/DST research proposals for funding and grant.
Student Mentoring
Inclusion of more industry experts in Board of Studies & Board of Examination
Strengthening the Alumni Network for future collaboration
Department has many alumni working across the globe in their capacity as managers, directors and entrepreneurs.
Training programs by Alumni.
Collaborating for recruitment (R. R Donnelley has showed interest and has recruited the students in the past, Mr. Kiran Shankar is an alumnus of I&PE Dept.)
Societal Reach through training programs/sensitization programs for prospective students and parents.

Program Educational Objectives (PEO)

#	Program Educational Objectives: -The Graduates will be able to:
PEO – 1	Graduates get employed in professions related to Industrial and Production Engineering adopting and adapting to advances in technology and management.
PEO – 2	Graduates pursue advanced studies at Institutions of higher learning to engage in research with an inclination towards life-long learning.
PEO – 3	Graduates become successful professionals in a challenging environment by becoming successful entrepreneurs keeping in mind the ethical responsibilities

Program Specific Outcomes(PSO)

#	Program Specific Outcomes: -The Graduates will be able to:
PSO-1	To create qualified budding, versatile and multifaceted Engineers to solve real-world problems with good theoretical and practical knowledge arising in the areas of Industrial Production Engineering.
PSO-2	To imbibe confidence in students to become entrepreneurs of the future.
PSO-3	To develop students with excellent presentation skills to take up innovative projects of industries.

Program Outcomes(PO)

#	Program Outcomes :-The Graduates will be able to:
PO-1	Engineering Knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
PO-2	Problem Analysis: Identify, formulate, research literature, and analyse complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
PO-3	Design/Development of Solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
PO-4	Conduct Investigations of Complex Problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
PO-5	Modern Tool Usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations
PO-6	The Engineer and Society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO-7	Environment and Sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
PO-8	Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO-9	Individual and Team Work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
PO-10	Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
PO-11	Project Management and Finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
PO-12	Life-long Learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Programmes Offered

Undergraduate	Postgraduate	Research
B.E.(Industrial Production and Engineering)	-NIL-	-NIL-

OBE Administration

Department Advisory Board / Committee

The department Academic advisory committee comprises HOD, senior faculty, external academicians, members from industry, alumni members and student members. The committee will review the academic quality and suggest improvements in the related areas.

I&PE DEPARTMENT ADVISORY BOARD (DAB)

SL. NO.	Name of the member	Designation	Role
1.	Dr. V. Ramesh	Professor & Head Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Chairman
2.	Dr. Arun Kumar	Associate Professor, Dept. of Mechanical Engineering, (Working in I&PE Department, SJCE, JSS S&T University, Mysuru)	Internal member
3.	Dr. Savitha M	Associate Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
4.	Dr. Dayakar G Devaru	Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
5.	Mr. Karibasavaraja D	Assistant Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
6.	Dr. Manjunatha B	Assistant Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
7.	Ms. Sowmya C	Assistant Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
8.	Dr. Skanda M G	Assistant Professor, Dept. of I&PE, SJCE, JSS S&T University, Mysuru	Internal member
9.	Dr. K.M. Subbaiah	Professor & Head Dept. of I&PE, NIE, Mysuru	External member
10.	Abdul Hanan khan	CEO, M.K. Agrotech, Pvt. Ltd, Mysuru	External member
11.	Mr. Hussein Vagh	Managing director Pyramid Timbers, Mysuru	External member
12.	Swathi Bhagavat	Managing Director, SPR group, Mysuru	External Member
13.	Kiran Shankar	President, RR Donnelley Go Creative, Newyork City, USA	External Member
14.	Sanjith Shetty	CEO, Soham Group of Companies, Bangalore	External Member

Board of Studies

YEAR-2020-BOS-list

Department Internal Committees

Chairperson and Supervisor of all the Committees: Dr. V. Ramesh, Professor & HOD

Year	Class Staff Coordinator
II	Mrs. Sowmya C
III	Dr. Arun Kumar
IV	Dr. Skanda M.G.

Module Coordinators:

Sl. no.	Module	Coordinator
1.	Production and Manufacturing Management	· Dr. Manjunatha B
2.	Engineering Management	· Dr. V.Ramesh · Dr. Skanda. M.G.
3.	Engineering Design	· Dr. Arun Kumar · Mr. D Karibasavaraja
4.	Industrial Engineering	· Dr. Dayakar G Devaru · Mrs. Sowmya. C.
5.	Materials Science	· Dr. Savitha M

COMMITTEES

Name of the Committee	Coordinating Faculty Member	Activity Description
Programme Assessment committee	Dr. Savitha M Dr. D Arunkumar	Monitoring of attainment of Pos and PEO’s monitoring the faculty and student towards attending workshops and conference: taking up projects.
Internal Quality Assurance cell	Dr. V. Ramesh	For maintaining the quality standards
I&PE PI Forum Sports sub committee Cultural Sub committee Literary committee	Dr. Savitha M Dr. Manjunatha B. Mrs. Sowmya C Dr. Skanda M.G.	Coordinating the extra circulars activities Coordinating the sports activities Coordinating culture activities Coordinating the literary activities
Technical Advisory committee	All the faculty members of the Department.	Organizing National seminars, Departmental lecturers, expert lectures Coordinating the technical activities of the students, Paper presentation & Competitive events
Soft skill development committee	Dr. V.Ramesh Dr. Savitha M Dr. Skanda M.G.	Coordinating and organizing soft skill development programmers for the students
Department Magazine Committee	Dr. Skanda M.G.	Complication of departments activities (staff and students) Collection and editing technical /General articles from the staff and students: formatting and publishing
Industrial Training & placement committee	Dr. Dayakar G Devaru Mr. D Karibasavaraja Dr. Manjunatha B.	Coordinating and organizing the sites visits and helping the students in internship and placements related activities
Project committee	Dr. D Arun Kumar Dr. Skanda M.G.	Coordinating minor and major projects of the students
Project evaluation committee	All the faculty members of the Department.	Continuous evaluation of the final year student’s projects.
Seminar Evaluation committee	All the faculty members of the Department.	Evaluation of technical seminar by the students
Alumni committee	Dr. Savitha M	Coordinating the alumni activities of the department.
Consultancy committee	All the faculty members of the department	Carrying out the consultancy work of the departments
Mentoring committee	All the faculty members of the department	Mentoring the students and trying to resolve three issues
Class Representatives	Year wise	Final Year: Mr. Vinay Kumar (2018-19) Pre-Final Year: Ms. Benki Snehal (Nominated) Second Year: Mr. Shreyas (Nominated)
Placement Secretaries	Vaishnavi K and Rounak Shetty

Mentoring System

SL.NO.	USN	NAME	FACULTY ADVISOR
1	01JST19IP001	Adithi Ananth	Dr. V Ramesh
2	01JST19IP002	Althaf T E
3	01JST19IP003	Amoghavarsha Nripatunga
4	01JST19IP005	Arundhati A
5	01JST19IP006	B B Chandan Urs
6	01JST19IP008	Chethan B
7	01JST19IP009	Chiranth K S
8	01JST19IP011	Dhanush M
9	01JST19IP012	Disha A
10	01JST19IP013	Diya M Subbaiah
11	01JST19IP015	Gayathri N
12	01JST19IP016	Goutham J
13	01JST19IP017	Gowtham H
14	01JST19IP019	Harish V Palankar
15	01JST19IP020	Harshith Venkat G
16.	01JST19IP021	Hruthik Kashyap B G	Dr. D Arunkumar
17.	01JST19IP022	Jeevitha C Shekar
18.	01JST19IP024	Kunal R
19.	01JST19IP025	Mallikarjun Jangamashetti
20.	01JST19IP026	Manjunath G N
21.	01JST19IP027	Meghana R
22.	01JST19IP028	Mehek Fathima
23.	01JST19IP029	Mir Zameer
24.	01JST19IP030	Muttu Manjunath
25.	01JST19IP032	Nagashree M V
26.	01JST19IP033	Neha C A
27.	01JST19IP034	Nirgun M V
28.	01JST19IP035	Nithya D
29.	01JST19IP036	Pradyumna S Acharya
30.	01JST19IP037	Prathiksha C S
31.	01JST19IP038	Preethi S	Dr. Savitha M
32.	01JST19IP039	Priyanka R
33.	01JST19IP041	Rahul R
34.	01JST19IP042	S Chandan
35.	01JST19IP043	Sai Sumukh S H
36.	01JST19IP046	Sohan Kumar S K
37.	01JST19IP047	Sudeep Y
38.	01JST19IP048	Suhas P
39.	01JST19IP049	Sumanth P
40.	01JST19IP050	Thushara V
41.	01JST19IP051	Vidisha H V
42.	01JST20IP400	ABHISHEK GOWDA K
43.	01JST20IP401	AKHILESH GOWDA Y S
44.	01JST20IP402	B M ANOOP
45.	01JST20IP403	CHANDAN RAGHAVENDRA S
46.	01JST20IP404	CHIRAG	Dr. Dayakar G Devaru
47.	01JST20IP405	DEEPAK A
48.	01JST20IP406	DEEPAK V
49.	01JST20IP407	DHANUSH G M
50.	01JST20IP408	GAGAN D
51.	01JST20IP409	HARSHA A S
52.	01JST20IP410	HARSHITH RAJU
53.	01JST20IP411	MANJUNATHA U
54.	01JST20IP412	MUHAIMEEM KHAN
55.	01JST20IP413	NANDAN KUMAR J K
56.	01JST20IP414	NIRUP A
57.	01JST20IP415	PRAVEEN KUMAR K
58.	01JST20IP416	RAVI KUMAR R
59.	01JST20IP417	SHASHANK N S
60.	01JST20IP418	VINEETH R
61.	01JST20IP419	YASHAS P
62.	01JST18IP001	AISHWARYA M V	Mr. Karibasavaraja
63.	01JST18IP002	AISHWARYA R
64.	01JST18IP003	AISIRI D
65.	01JST18IP004	AJAY P N
66.	01JST18IP005	AMEENA MERAJ
67.	01JST18IP006	APOORVA P
68.	01JST18IP008	ASHWITHA M
69.	01JST18IP009	BHOOMIKA R POOJARI
70.	01JST18IP012	CHANDA C M
71.	01JST18IP013	DEVARAJU B M
72.	01JST18IP014	G BHARGAVI
73.	01JST18IP015	GANESH I H
74.	01JST18IP016	GAURAV S
75.	01JST18IP017	HAMSAVENI A	Dr. Manjunatha B
76.	01JST18IP018	HARISH KUMAR
77.	01JST18IP019	HARSHAD T H
78.	01JST18IP020	HEMANTH K M
79.	01JST18IP021	HITHIN N
80.	01JST18IP022	JAYAPRIYA K B
81.	01JST18IP026	M B KRUTHI
82.	01JST18IP027	MADHAV KAUSHIK
83.	01JST18IP028	MAMATHA J
84.	01JST18IP029	MARIAM ZAKIR AHMED
85.	01JST18IP031	NAMITH JAIN J
86.	01JST18IP034	NAYANA P
87.	01JST18IP035	NIKIL NACHAPPA M U
88.	01JST18IP036	NOYONIKA M R	Mrs. Sowmya C
89.	01JST18IP037	PADMASHREE KARNAM
90.	01JST18IP039	PRADYUMNA S BHARADWAJ
91.	01JST18IP040	RAKSHITHA N
92.	01JST18IP041	RAVIKUMAR M
93.	01JST18IP043	SAMEEKSHA A V
94.	01JST18IP044	SAMIKSHA S URS
95.	01JST18IP045	SHREYAS ARADHYA A C
96.	01JST18IP046	SPANDANA N
97.	01JST18IP047	SPARSHA Y
98.	01JST18IP049	SRIVATSA KRISHNA MUGALI
99.	01JST18IP050	SUMUKH S
100.	01JST18IP051	SURYAPRAKASH G
101.	01JST18IP052	SUSHMITHA S	Dr. Skanda M G
102.	01JST18IP053	TEJASWINI M
103.	01JST18IP054	V KRISHNAKANTH KEMPAIAH
104.	01JST18IP055	VIDYASHREE C M
105.	01JST18IP056	VINEETHKUMAR A
106.	01JST18IP401	AKSHAY N SHETTY
107.	01JST18IP405	MADHU HN
108.	01JST19IP400	DILIP P
109.	01JST19IP401	HEMANTH U R
110.	01JST19IP402	NITHYANANDA T
111.	01JST19IP403	SUDHARSHAN R
112.	01JST19IP404	SUFIYAN AHMED

Infrastructure Facility

Details of Lab facilities

Name of the Laboratory	Name of the Major Equipment
Metrology & Measurements	· Profile Projector · Talyrond · Autocollimator · Tool Makers Microscope · Dial Micrometer · Optical Flats · Levelling Press · Gear Tooth Micrometer · Spline Micrometer · Deep Hole Dial Depth Gauge · Dial Micrometer · V-Anvil Micrometer · Magnetic Check Profile Projector Vernier Calipers · Dial Calipers · Digital Calipers
Industrial Engineering Laboratory	· Modern Tread Mill · Ergometer · Workstudy Professional software.
CAD/CAM/CAE	· UGS NX Bundle – 75 Seat License · Solid Edge Student version · ANSYS 10 Student Edition · CNC EXSL Simulation software – 10 Seat License · CADEM – 15 Seat License
Software Applications / Operations Research Laboratory	· TORA –Operations Research free Software · WinQSB (Windows Quantitative Systems for Business) – Free Software
Centralized Laboratories/Workshops
· Basic Materials Testing Laboratory · Workshop · Machine Shop, · Mechanical Lab

Classroom

Department has spacious classrooms with adequate seating capacity with proper acoustics. In addition, the Department of I&PE is having a smart board at IP005 Seminar Hall to teach students using visual aids.

Know your Faculty

Teaching Faculty

Sl. No.	Name	Designation	Research Area	Email (University Email)
1.	Dr. V. Ramesh	Professor & HOD	Manufacturing Management, Lean and Agile Manufacturing.	rameshv@jssstuniv.in
2.	Dr. D Arunkumar	Associate Professor (Department of Mechanical Engineering, deputed to I&PE Department)	Machine Design, Lean and Agile Manufacturing.	arunkumar@jssstuniv.in
3.	Dr. Savitha M	Associate Professor	Composite Materials, Smart Materials.	savitham@jssstuniv.in
4.	Dr. Dayakar G Devaru	Professor	Energy Engineering, Lean Manufacturing, Operations Research	dayakar.devaru@jssstuniv.in
5.	Mr. D Karibasavaraja	Assistant Professor	Fracture Mechanics	karibasavaraja@jssstuniv.in
6.	Dr. Manjunatha. B	Assistant Professor	Product Design and Manufacturing, TPM	manjub@jssstuniv.in
7.	Mrs. Sowmya. C	Assistant Professor	Production Engineering, Lean Manufacturing and TRIZ	sowmyac@jssstuniv.in
8.	Dr. Skanda M. G	Assistant Professor	Engineering Management, Human Factors Engineering.	skanda.rao@jssstuniv.in
9.	Mr.Santhosh C	Assistant Professor	M.Tech Machine Design	santoshcp4@gmail.com

Technical Staff

NAME

QUALIFICATION

DESIGNATION

CONTACT DETAILS

MAHADEVASWAMY M

DIPLOMA IN MECHANICAL ENGG.(MTT)

INSTRUCTOR

+91 9886730709

SHANKARAIAH

S.S.L.C. ITI -FITTER

ASST. INSTRUCTOR

+91 9632547705

NAGESH G.S.

S.S.L.C. ITI-TURNER

HELPER

+91 8971782947

CHANDRASHEKARA S R

P.U.C., (BA.,)

HELPER

+91 8152025057

ABHIJITH

ITI – FITTER DIPLOMA IN MECHANICAL

HELPER

+91 7483775532

Curriculum & Timetable

Scheme

Time Table

IPE Time Table 3rd 5th & 7th 2021

Revised Final IPE Time Table 3rd 5th & 7th 2021-16 11- 2021 (5pm)

BE FIRST SEMESTER 2021-22

BE FIRST SEMESTER TT_2021-22 (03.01.2022)

FDPS /Conferences / Workshops Organized

Technical Programs Organized

Sl. No.	Name of the Invited Speaker	Title/Summary of the Lecture delivered	Speaker Details	Date
1.	Mr VIJAY KUMAR	The Industrial Applications of the concepts learnt in college and gave the insight to build the gap between industry and Academy.	VIJAY KUMAR, MD, TVS MYSURU Plant	05th April 2018
2.	Mr. Balawat	Understanding of the properties and applications of various materials and how these materials are being used in day to day life in different engineering applications.	Mr. Balawat, Consultant, Mysuru	16 Feb 2019
3.	Mr. S Badri Narayana	‘Value 1.0 leading to Industry 4.0	Mr. S Badri Narayana Taoknoware, CEO B’LORE	16.2.2019
4.	Mr. M.S Chandrashekar.	Advances in Manufacturing Technology’	Mr. M.S Chandrashekar KPTCL, CHIKKAMANGALURU	23.2.2019
5.	Mr. Dinesh Kumar D.K	“Awareness Program on Renewable Energy”	Mr. Dinesh Kumar D.K Project Engineer, KREDL Mysuru	16th August 2019
6.	Dr. Hanumanthachar Joshi	“Management of memory and concentration – challenges and	Dr. Hanumanthachar Joshi, Professor and Head, Sarada Vilas College of Pharmacy, Mysore	17th September 2019
		opportunities”
7.	Mr. Vedamurthy Dr. Shirish Kala Mr. Atul Phadke Mr. Sandeep Singh Mr. Mahesh V Ayer Dr. Deepak Gupta	Expert Lecture Series (Webinars); ‘Essential Skills to become an Industrial Engineer’	Ingersoll Rand (India) Limited, Ahmedabad Clark FIxture Technologoies India Pvt Ltd, Mysuru Eaton, Pune Hewlett Packard Enterprise, Bengaluru NCR Corporation, Chennai	27July 2020 – 1 Aug 2020 and 8 Aug 2020
			Wichita State University, USA

Research Initiatives

Research Guides and Areas Available for Ph.D Programs

Sl. No.	Name	Area of Specialization
1	Dr. V. Ramesh	Manufacturing Management, Lean and Agile Manufacturing
2	Dr. Dayakar G. Devaru	Energy Engineering, Lean Manufacturing, Operations Research
3	Dr. D. Arunkumar (Mechanical Engineering Department, Deputed to I&PE Department)	Machine Design, Lean and Agile Manufacturing
4	Dr. M. Savitha	Composite Materials, Smart Materials.
5	Dr. Manjunatha B	Product Design and Manufacturing, TPM
6	Dr. Skanda M G	Engineering Management, Human Factors Engineering.

Research scholar Pursuing Ph.D under JSS STU

Guide	Research Scholar (Full/Part Time)	Research Topic	Registration Year	Status
Dr. V Ramesh	Mrs. C Sowmya (Part Time)	“Lean and Inventive Problem Solving Techniques for the Sustainable Model in Shop Floors of Medium Scale industries”	2017	Pursuing
Dr. Dayakar G Devaru	Mr. Pratheek Poovaiah (Part time)	“Assessing and Improving Energy Efficiency and Productivity of a Two-Wheeler Manufacturing Plant”	2020	Pursuing
Dr. Savitha M Dr. Manjunatha B	Mrs. Bhavya V 1. Mr. Praveen Kumar U B (Part time)	“Development of Graphite Reinforcement in Nylon 66 for Dry Lubricant Application” “Structural Evaluations, Mechanical Testing and Characterization of Inconel Super Alloy used in Aero Engine Disks”	2021 2021	Pursuing Pursuing
	2. Mr. Kousik S (Part time)	“Optimization of Flow Shop Scheduling Problem Using Setup Times”	2021	Pursuing

Industry Institute Interaction

Department is having an industry linkage with many industries like Mercedes Benz, TVS motors etc. Students have undergone training and done their internships for many industrial projects,
Faculty members and Students have visited many industries as a part of Industrial visits to many reputed institutions & organizations like ISRO, IISc, BOSCH, TVS, Toyota, West Coast Paper mills etc.
Students of the department have done their internships in many reputed companies.

SL.NO	USN	NAME OF THE STUDENT	YEAR OF PASSING OUT	INTERNSHIP
1	4JC15IP001	ADITHYA C S	2019	GOKULDAS
4	4JC15IP006	ANJANA S KUMAR		MERCEDES MIM
6	4JC15IP017	HIMANI S PORWAL		MERCEDES MIM
7	4JC15IP019	JAYASHREE H R		MERCEDES MIM
14	4JC15IP038	PRERANA. P		MERCEDES MIM
15	4JC15IP039	RAKSHA SHESH		MERCEDES MIM
17	4JC15IP044	SANJANA J		GOKULDAS
19	4JC15IP050	SONAL PAL		GOKULDAS
20	4JC15IP052	SPANDANA S		GOKULDAS
21	4JC15IP056	SUSHMITHA SURAJ		MERCEDES MIM
22	4JC15IP059	THANUSHREE H P		MERCEDES MIM
25	4JC16IP402	CHANDRAKANTH U		GOKULDAS

1	01JST16IP003	Abinaya R	2020	Mdrdi
2	01JST16IP004	Achal B Hebbar		lam research
11	01JST16IP042	Shreya S		lam research

2	01JST17IP003	Benki Snehal		Benz Mim
3	01JST17IP005	Chandan Kumar K		Cognizant
4	01JST17IP007	Chethan Raj PN		Cognizant
5	01JST17IP012	G Vishok		Cognizant
7	01JST17IP016	KARTHIK S		Cognizant
8	01JST17IP033	Prajwal S		Cognizant
12	01JST17IP044	S K CHANDANA		Benz Mim
15	01JST17IP053	Suraj R		Cognizant
16	01JST17IP055	Vaishnavi k		Cognizant
17	01JST17IP056	Venkatesh Heggade S R		Cognizant

Funded Project

Funded Project Details:

Modernization of Computer Lab

Project Title

Funding Agency

Amount

Duration

Status

Modernization of Computer Lab

AICTE-MODROBS

Rs. 11,00,000/-

3 Years (2019-2022)

Active

Consultancy Details

Sl.No.

Work Title

Investigators

Client Details

Amount

Duration

Action

Energy Audit of JSS College for Women, Kollegal

Dr. Dayakar G Devaru

Dr. Mohan N

Mr. Ravishankar B S

JSS College for Women, Kollegal

Rs. 16,000/-

11.12.2021 to 29.12.2021

Completed

Energy Audit of JSS College for Women, Saraswathipuram, Mysuru.

Dr. Dayakar G Devaru

Dr. Mohan N

Mr. Ravishankar B S

JSS College for Women, Saraswathipuram, Mysuru.

Rs. 15,000/-

29.11.2021 to 22.12.2021

Completed

Collaborations and Outcomes

Interdisciplinary/multidisciplinary collaboration is a key for success in the research. The department has national and international collaborations from academic and research institutions.

Sl. no

Title of the Paper

Authors

Journal Name with ISSN Number

Journal Details

“The Impact of Digitalization on the Bank Competitiveness”

Dr. Skanda M G, collaborated with Vladislav Rutskiy et.al

Siberian Federal University Krasnoyarsk, Russia

Proceedings of the Computational Methods in Systems and Software

Data Science and Intelligent Systems, https://link.springer.com/chapter/10.1007/978-3-030-90321-3_73#citeas

Placements

Particulars	2020-21	2019-20	2018-19
No of students	53	57	61
No of students placed	19	17	25
Higher studies	2	3	7
No. of students turned entrepreneur in engineering/technology	1	2	2

Extra-Curricular Activities

Department Activities

Events and Seminars / Workshops

—-Update soon—–

Distinguished Alumni

Sl. No.	Distinguished Alumni with their achievements and present status.
1.	Mr. Sharath Mano, Lieutenant, Indian Army
2.	Mr. Kiran Raj Bhatt, Officer, Indian Navy.
3	Mr. Kiran Shankar, MD South Asia Head, RR Donnelley Pvt. Ltd.
4	Mr. Pavan Ranga, CEO Rangsons Electronics, Mysore
5	Mr. Sanjeeth Shetty, CEO Shoham Group of Companies, Bangalore
6	Mr. Abdul Hanan Khan, CEO and Managing Director, M.K. Agrotech (Sunpure Oil).
7	Mr. Hussein Vagh, CEO, Pyramid Timbers.
8	Mr. Vasudeva, MD, Robert Bosch, Bangalore.
9	Mr. Subramanyam, MD, Shimoga Steels
10	Ajith Pai, MD, Vijaya Wires and Filaments.
11.	Mrs. Swathi Bhagawath, Managing Director, SPR group of Hotels.
12.	Mr. Ratheesh and Anand, CEO, VIVRT Motors.
13.	Mr. Abhishek Dambal, CEO, YAANA Pvt. Ltd.

Publications

Faculty members and research scholars undertake research work along with their regular teaching workload. Faculty members have published around 40+ publications in Journals and conferences between the years 2017 to date.

Publication Details

Journal Publication 2021

Sl No.	Publication
1	Dr. Dayakar G Devaru, Bhaskaran Gopalakrishnan, “Regression Model to Estimate Electrical Energy Consumption of Lumber Sawing based on product, process and system parameters”, Energy Efficiency Journal, October 2020 13(8), 1799-1824, Springer Publications. (Scopus Indexed Journal)
2	Dr. Skanda M G, Dr. V Ramesh, Dr. D Arunkumar, “Importance of Error Management in Occupational Safety: A Case Survey Conducted in Manufacturing Set-ups”, Design Engineering, 13190-13200, Vol 2021, Issue 08
3	Dr. Manjunatha B, Dr. Neetha K, A S Bindhu, “Optimization of a Plant Layout for the Forklift Movement for a Coffee Plant”, Journal of PSYCHOLOGY AND EDUCATION (2021) 58(5), ISSN 1553 – 6939

Conference Publication 2021

Sl No.	Publication
1	Vinutha P, Divakar H N, Subbaiah K M and Savitha M, “Preparation and Characterization of temperature regulating silk cocoon extract (SERICIN)/PVA based smart fabric” International conference on Trends in Mechanical Sciences (ICTMES 2020) 06 – 07 August 2020, Malnad College of Engineering, Hassan, India
2	Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, “Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach”, International Conference on Futuristic Trends in Mechanical Engineering, 2020
3	D Kari Basavaraja, C Sowmya, and Ravindra Naik, “Experimental analysis of Fracture Toughness of EN9 and EN31 Steel under double layer of electroplating materials with different varied thickness”, IOP Conference Series: Materials Science and Engineering, Volume 1065, 1st International Conference on Frontiers in Engineering Science and Technology (ICFEST 2020) December 18th-19th 2020, Mangalore, India
BOOKS/BOOK Chapters
Chapter 5, “Evaluating the Influence of Energy Consumption on Process Plan Attributes: Process Plans Indexing Based on Electrical Demand and Energy Consumption” Omar AlShebeeb, Bhaskaran Gopalakrishnan, Dayakar Devaru, Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering, IGI Global Publications, September 2020
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, “Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach”, Part of the Lecture Notes in Mechanical Engineering book series (LNME), August 2021,
Dr. Skanda M G, and Dr. V Ramesh, written a book being published by VTU Prasaranga, Belagavi in Kannada on “Lean Manufacturing”. Book draft is accepted by VTU, Belagavi and it is in the process of publication

Papers published in last 04 years

	2017-18	2018-19	2019-2020
Number of Research papers in refereed journals	04	10	13
Number of Conference papers.	05	20	08
Number of Books with publisher details.	NIL	NIL	01

Publications 2017-18

Conferences:

T.R.Srinivas and Manjunatha B. (2017). Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21^st – 23^rd December 2017.

Manjunatha B, Dr. T R Srinivas, Presented a Paper on “Method Study on laboratory Reagents consumption in Tertiary Healthcare firms to increase productivity ”, International Conference on Mechanical, Manufacturing, Industrial & Civil Engineering(ICMMICE) organized by Advanced research society for science and sociology association with ISSRD, Bengaluru, on 29^th April 2018.

T.R.Srinivas and Prashanth Pai M. (2017). Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21^st – 23^rd December 2017
T.R.Srinivas and Rishi J P. (2017). A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21^st – 23^rd December 2017.
Skanda M.G., Dr. V. Ramesh, “Study on Human Error Management Culture in Medium and Small Scale Manufacturing Setups of Mysore city in India”, 8th International Conference on Applied Human Factors and Ergonomics (AHFE 2017) held in Los Angeles. USA from 7.2017 to 21.7.2017.
Skanda M G, Dr V Ramesh. (2017). Industrial accidents and Individual Differences: A Review on Personality Traits and Accident Proneness in Manufacturing Sectors , Proceedings of the International Conference on Recent Engineering and Technology 2018, 05th May 2018, Bangalore, India organized by Organization of Science and Innovative Engineering & Technology.

Journals

Sowmya C, Dr V Ramesh, Karibasavaraja D. (2017). An Experimental Investigation of New Hybrid Composite Material using Hemp and Jute Fibres and Its Mechanical Properties through Finite Element Method , Materials Today Proceedings 5 (2018) 13309-13320, published by Elsevier Science Direct.
Manjunatha B Dr. T.R Srinivas and Neetha K, “Method Study on laboratory Reagents consumption in Tertiary Healthcare firms to increase productivity ”, International Journal of Mechanical and Production Engineering (IJMPE), Volume-6,Issue-6,pp 62-66 ,2018. ISSN(p): 2320-2092, ISSN(e): 2321-2071http://www.iraj.in/journal/journal_file/journal_pdf/2-476-153396666862-66.pdf
Sowmya, Karibasavaraja D, Dr. V Ramesh and Skanda M.G titled “the Effects of Electroless Nickel Phosphorus Deposition, pH and Temperature with the Varying Coating Bath Parameters on Impact Energy by Taguchi Method” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering (WASET) Vol:11, No:4, 2017.
Raghu S, M, Nanjundaswamy H M, Dr Savitha M, Sreenivasa M. (2017). Synthesis and Characterization of Mechanical properties of Nano TiO₂particulate reinforced Al-MMC International Journal of Mechanical and Production Engineering Research and Development – IJMPERD.

Publications 2018-19

Conferences

T. R Srinivas and Rishi J P. (2018). presented a Paper titled Implementing the Lean Framework in a Small & Medium & Enterprise (SME) – A Case Study In a Printing Press ’’ in International Conference on advances in Manufacturing Materials & Energy Engineering IConMMEE2018) conducted at MITE, Moodbidri Karnataka India, from 2nd & 3rd March 2018. Paper presented is now published in IOP conference series. It’s an open access Scopus indexed conference proceedings.

Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J. (2018). Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry, MATEC Web of Conferences 144, 05001 (2018), https://doi.org/10.1051/matecconf/201814405001.

Dayakar G. Devaru, Mr. Abhinandan H H, “Indian Sugar Industries Profile, Problems and Energy Efficiency Solutions”. Paper No. 174, International Conference on Innovations in Engineering, Technology and Sciences, NIEIT, Mysuru, Sept. 2018
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Implementation of Lean Strategies and Total Productive Maintenance (TPM) in A Wheel and Axle Plant, IEEE 4^th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Quantitative Approach to Identify the Contributing Factors for the Non-usage of TPM in Selected SMEs, IEEE 4^th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Fabrication of EDM Electrode by Laser Sintering Method for SS316L Material, IEEE 4^th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, Influence of cutting speed on cutting force, Tool flank wear in Turning of Ti-6Al-4V alloy, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
Ramachandra C G, Neetha K, Dr. Srinivas T R, Increase of Overall Equipment Efficiency of a CT scan equipment using Total Productive Maintenance Techniques, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
Rishi J P, Dr. Srinivas T R & Dr. Ramachandra C G, Challenges and Success Factors for Implementation of Lean Manufacturing in Indian SMEs, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey Approach to Study the Factors Affecting Usage of TPM in Non-Manufacturing Industries, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018.
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Lean Manufacturing to Green Manufacturing: Practices and its Implementation in SME’s, International Conference on Green Trends in Mechanical Engineering Sciences GTMES-2018 A twinning program organized by Malnad College of Engineering, Hassan, Karnataka & Johrat Engineering College, Johrat, Assam, India, during October 3-5, 2018
Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Experimental Analysis Of Cutting Parameters On Tool Wear And Workpiece Surface Temperature In Turning Of Ti-6al-4v (Titanium Grade -5) Alloy, International Conference Advanced Ceramics and Nanomaterials for Sustainable Development, ACEND -2018 organized by Christ University, Bengaluru during 19^th – 21^st September 2018.
Manjunath B, T R Srinivas & Dr. Ramachandra C G, Reduction of CO₂ emission in a Hotel Industry by using Total Productive Maintenance (TPM) Tools, International Conference & Pre-Conference Workshop on Emerging Trends in Mechanical Engineering e-Time 2018 organized by St Joseph’s Engineering College, Mangaluru during 10^th – 11^th August 2018
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey on Factors Affecting Total Productive Maintenance (TPM) in Service Industries, International Conference & Pre-Conference Workshop on Emerging Trends in Mechanical Engineering e-Time 2018 organized by St Joseph’s Engineering College, Mangaluru during 10^th – 11^th August 2018.
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey on TPM Usage and Factors Affecting Its Implementation in Selected Industries, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24^th – 25^th March 2018.
Ramachandra C G, Dr T R Srinivas, PrashanthPai M & Rangavendra M J, Condition Monitoring of Batch Off Mill in a Tyre Manufacturing Industry, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24^th – 25^th March 2018.
Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Comparative Study on Temperature Measurement of a Coated and Uncoated Tool Insert in Turing Process by using Tool Work Thermocouple, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24^th – 25^th March 2018
Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Optimization of Surface Roughness in Turning Operation in Machining of TI-6AL-4V (Titanium Grade -5), International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.
Rishi J P, Dr. Srinivas T R, Dr.Ramachandra C G & Dr.B C Ashok, Implementing the Lean Framework in a Small Medium Enterprise (SME)-A Case Study in Printing Press, International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Study on Usage of Total Productive Maintenance in Selected SMEs, International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.

Journals

Skanda M.G. and Dr. V. Ramesh. (2018). Published a paper titled Industrial Accidents and Individual Differences: A Review on Personality Traits and Accident Proneness in Manufacturing Sectors published in Journal of Advanced Research in Dynamical & Control Systems, Vol. 10, 05-Special Issue, 2018
Karibasavaraja D, Sowmya C. & Dr. Ramesh V. (2018). Published in Elsevier Science Direct indexed paper titled An Experimental Investigation of New Hybrid Composite Material using Hemp and Jute

Fibres and Its Mechanical Properties through Finite Element Method in Material today Proceedings 5(2018) 13309–13320

Raghavendra M J, Dr. Ramachandra C G, T R Srinivas & Prashanth Pai M. (2018). Optimization of Surface Roughness in Turning Operation in Machining of Ti-6al-4v (Titanium Grade -5), IOP Conf. Series: Materials Science and Engineering 376 (2018) 012128 doi:10.1088/1757-899X/376/1/012128, IOP Publishing-2018.
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Study on Usage of Total Productive Maintenance (TPM) in Selected SMEs, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012117 doi:10.1088/1757-899X/376/1/012117, IOP Publishing-2018.
Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of Surface Roughness in Turning Operation in Machining of Ti-6al-4v (Titanium Grade -5), IOP Conf. Series: Materials Science and Engineering 376 (2018) 012128 doi:10.1088/1757-899X/376/1/012128, IOP Publishing-2018.
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Implementing the Lean Framework In ASmall & Medium & Enterprise (SME) – A Case Study In Printing Press, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012126 doi:10.1088/1757-899X/376/1/012126, IOP Publishing-2018.
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry, MATEC Web of Conferences 144, 05001 (2018), https://doi.org/10.1051/matecconf/201814405001.
Manjunath B, T R Srinivas & Dr. Ramachandra C G, Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry, RiMES-2017, MATEC Web of Conferences 144, 05004 (2018), https://doi.org/10.1051/matecconf/201814405004.
Rishi J P, Abhishek, Dr. Srinivas T R & Dr.Ramachandra C G, A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant, MATEC Web of Conferences 144, 05005 (2018), https://doi.org/10.1051/matecconf/201814405005.

Publication Details: 2019-20

Conference

Sowmya, V.Ramesh, Vijaya Kumar P titled “Man Power Reduction in Moulding Operations through SWCT study technique” communicated in 2^nd International Conference on Advances in Mechanical Engineering Sciences ICAMES – 2K20.
Extraction of Water from Air Using Renewable Energy,

Dr. Dayakar G. Devaru, Mr. Ravishankar M.D, Dr. Rathnakar G

National Conference on Research Advances in Engineering & Technology, CSI Engineering College, Ketti Valley, Ooty 2019.

PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R, Ramesha S & Rangavendra M J, Overall Equipment Effectiveness of a Mechanical Press in a Manufacturing Unit – A Case Study, Global Conference on Advanced Smart & Sustainable Technologies in Engineering (GCASSTE-2020), organized by Department of Mechanical Engineering, Mangalore Institute of Technology & Engineering, Moodbidri, Karnataka, during 30-31 January 2020.
PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey Approach to Study the Influence of Management Factor in Implementing TPM in Selected SMEs, International Conference Emerging Trends in Mechanical Engineering (eTIME 2019), organized by St. Joseph Engineering College, Vamanjoor, Mangaluru, Karnataka, during 9-10 August 2019.
Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy, 2^nd International Conference Emerging Research in Civil Aeronautical and Mechanical Engineering(ERCAM-2019), organized by Nitte Meenakshi Institute of Technology, Bengaluru, during 25-26 July 2019.
Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of surface roughness of Titanium Gr-9Alloy Turning using Taguchi method, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.
Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P, Rangavendra M J, Factors Influencing the Non-Implementation of TPM in the Selected Manufacturing Industries – A Statistical Approach, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.

Journals

Raghavendra M J, Dr. Ramachandra C G, T R Srinivas & Prashanth Pai M, Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy, AIP Conference Proceedings 22204, 040024-1–040024-9; https://doi.org/10.1063/1.5141597, AIP Publishing-January 2020
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Lean Manufacturing to Green Manufacturing: Practices and its Implementation in SME’s Applied Mechanics and Materials ISSN: 1662-7482, Vol. 895, pp 21-25 doi:10.4028/www.scientific.net/AMM.895.21 © 2019 Trans Tech Publications Ltd, Switzerland
Manjunatha B, Dr. T.R Srinivas and Dr. Ramachandra C G, “Reduction of CO2 emission in a Hotel Industry by using Total Productive Maintenance (TPM) Tools”, AIP Conference Proceedings 2080, 060001 (2019); https://doi.org/10.1063/1.5092936.
Dayakar G. Devaru, Bhaskaran Gopalakrishnan, “Regression Model to Estimate Electrical Energy Consumption of Lumber Sawing based on product, process and system parameters”, Submitted to Energy Efficiency Journal, Springer Publication, Scopus Indexed Journal in 2019, Completed corrections after 1^st Review in 2020
Dayakar G. Devaru, Mr. Ravishankar M.D, Dr. Rathnakar G

“Extraction of Water from Air using Silica Gel and Solar Energy”

(Submitted to International Journal of Mechanical and Production Engineering Research and Development, Transstellar Journal Publications, Scopus Indexed Journal in 2020).

Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of surface roughness of Titanium Gr-9Alloy Turning using Taguchi method, IOP Publishing: Materials Science and Engineering.
Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P, Rangavendra M J, Factors Influencing the Non-Implementation of TPM in the Selected Manufacturing Industries – A Statistical Approach, IOP Publishing: Materials Science and Engineering.
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach, IOP Publishing: Materials Science and Engineering.
Arunkumar, Dr. V. Ramesh and Skanda M.G., ‘Implementation of Rapid Upper Limb Assessment Technique in Automotive Parts Manufacturing Industry’ , International Journal of Recent Technology and Engineering. ISSN: 2277-3878, Volume-8, Issue-3, September 2019
Dayakar G. Devaru, Ramakrishna Maddula, and Bhaskaran Gopalakrishnan,“Establishing and Comparing Electrical Energy Consumption of Sawmills”. International Journal of Applied Management Science; 2020 Vol.12 No.1, pp.23 – 49 (Inderscience Publications, Scopus Indexed Journal) DOI: 10.1504/IJAMS.2020.105299. (https://www.inderscience.com/info/inarticle.php?artid=105299)
Dayakar G. Devaru, “Evaluation and Indexing of Process Plans Based on Electrical Demand and Energy Consumption” International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)2017 7(3), Pages 19 (Scopus Indexed Journal) DOI: 10.4018/IJMMME.2017070101 Omar Ahmed Al-Shebeeb, Sivakumar Rangaswamy, Bhaskaran Gopalakrishan, (https://www.igi-global.com/article/evaluation- and-indexing- of-process- plans-based- on- electrical-demand- and-energy- consumption/182487)

12. Dr. Savitha M et.al “Innovative Axle Design for Multipurpose Vehicle”. Journal of Automobile Engineering, 2019. (Communicated)

13. Raghavendra M J, Dr.Ramachandra C G, Dr. T R Srinivas & Prashanth Pai M, Experimental Analysis of Cutting Parameters on Tool Wear and Work Piece Surface Temperature in Turning of Titanium Grade-5, International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056, Volume No.7 Issue No. 1, January-2020, Page No. 1709-1713.

14. Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P, Rangavendra M J & Anitha Kamath, A Survey Approach to Study the Influence of Finance Factor & Workforce Skills in Implementing TPM in Selected SMEs, International Journal of Production Engineering. Volume No.3 Issue No. 10, 2019; 5 (1): pp. 5–12.

Industrial and Production Engineering

About Department

Message From HOD

Vision

Mission

Short term plan

Long Term Plan

OBE Administration

Know your Faculty

Curriculum & Timetable

2018 Scheme III-VIII

2018 Scheme VII- VIII

2020 Scheme III-VIII & III-IV-Syllabus

IPE Time Table 3rd 5th & 7th 2021

BE FIRST SEMESTER 2021-22

Research Initiatives

Funded Project Details: