Mechanical Engineering

About Department

The Department of Mechanical Engineering was established in the year 1963. The department offers one Under graduate and one post graduate programs. B.E. in Mechanical Engineering has an intake of 120 students, M.Tech in Maintenance Engineering with an intake of 12 students. The Department offers research programmes leading to M.Sc.(Engg) and Ph.D. The Department has qualified and experienced faculty, 8 with doctoral degrees. Faculty has published more than 300 research articles in the reputed Journals and Conference proceedings. Students are encouraged to take up internships in reputed organizations for knowledge upgradation in advanced areas of mechanical engineering. The students of the department have a good placement record.

Message from HOD

The Department of Mechanical Engineering is consistent in improvement of its academic, research and placement performance. The Department offers BE in Mechanical Engineering with an intake of 120 students and M Tech in Maintenance Engineering with an intake of 12 students. It also offers two research programs, M.Sc.(Engg) and Ph.D.

The curricula of both BE and M Tech are constantly updated to meet the requirements of the industries. The curriculum is taught by well qualified and experienced faculty with dedication and commitment. The students of the department have a good placement record.

The students are encouraged to get hands-on experience and appreciate the theoretical and practical knowledge gained by them being used in the industries during the internship/industrial training which they undergo for a duration of 4 weeks.

Students undertake project work which enables them to understand the significance of working in a group and also help them to realize the aspects and importance of teamwork in utilizing the theoretical knowledge to practical.

Students are also encouraged to participate in national and international level technical competitions like SAE BAJA, Aero JC in which students have performed well and won many prizes.

The students also organize events such as MECHMERIZE, in which cultural and technical events are conducted.

This website provides an overview of the Department. If you have further queries after browsing this website, contact us for clarifications.

Dr. R Ravishankar
Associate Professor and Head of Dept.
me.rr@sjce.ac.in
+919900107507

Vision

Department of mechanical engineering is committed to prepare graduates, post graduates and research scholars by providing them the best outcome based teaching-learning experience and scholarship enriched with professional ethics.

Mission

Prepare globally acceptable graduates, post graduates and research scholars for their lifelong learning in Mechanical Engineering, Maintenance Engineering and Engineering Management.
Develop a futuristic perspective in Research towards Science, Mechanical Engineering, Maintenance Engineering and Engineering Management.
Establish collaborations with Industrial and Research organizations to form strategic and meaningful partnerships.

Department Highlights

Majority of the faculty have obtained Ph.D. and the rest have enrolled and are pursuing Ph.D in their area of Interest.
Global Initiative Academic Network (GAIN) program has been conducted with international collaborations.
Faculty empowered with domain-specific training programs resulting in a good number of publications.
Faculty trained through MOOC, SWAYAM, NPTEL and Coursera programs.
Students are encouraged and motivated through technical and Professional clubs like MEA, SAE, AeroJC, etc to promote overall development.

Thrust Areas

Thermal Engineering
Engineering Management/ Industrial Engineering
Production engineering and system technology
Design Engineering
Composite Materials

Strategic plan

Short Term

To update the curriculum considering the recent technology based on industrial needs.
To encourage the students to participate in national and international technical events.
To improve the research facilities.

Long Term

To start new M.Tech programs in advanced topics.
To improve the consultancy services to the industries.

PROGRAM EDUCATIONAL OBJECTIVES(PEO)

#	Program Educational Objectives:-The Graduates will be able to:
PEO – 1	To apply industrial manufacturing design system tools and necessary skills in the field of mechanical engineering in solving problems of the society.
PEO – 2	To apply principles of management and managerial concepts to enhance global economic growth.
PEO – 3	To apply thermal, fluid and materials engineering concepts in solving problems concerning environmental pollution and fossil fuel depletion and work towards alternatives.

PROGRAM SPECIFIC OUTCOMES(PSO)

#	Program Specific Outcomes :-The Graduates will be able to:
PSO-1	Apply modern tools and skills in design and manufacturing to solve real world problems.
PSO-2	Apply managerial concepts and principles of management and drive global economic growth.
PSO-3	Apply thermal, fluid and materials fundamental knowledge and solve problem concerning environmental issues.

PROGRAM OUTCOMES(PO)

#	Program Outcomes :-The Graduates will be able to:
PO-1	Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
PO-2	Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
PO-3	Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
PO-4	Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
PO-5	Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.
PO-6	The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO-7	Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
PO-8	Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO-9	Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
PO-10	Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
PO-11	Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
PO-12	Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Programmes Offered

Scroll below to download the Curriculum.

Undergraduate	Postgraduate	Research
B.E. (Mechanical Engineering)	M.Tech.(Maintenance Engineering)	Ph.D. (Mechanical Engineering)

OBE Administration

DEPARTMENT ADVISORY BOARD / COMMITTEE

The department Academic advisory committee comprises HOD, senior faculty, external academicians, members from industry, alumni members and student members. The committee will review the academic quality and suggest improvements in the related areas.

#	NAME WITH DESIGNATION	CATEGORY
1	Dr. R Ravishankar Associate Professor and Head, Department of Mechanical Engineering, SJCE, Mysuru	Internal Academician Chairman
2	Dr. T. Manjunatha Associate Professor, Department of Mechanical Engineering, SJCE, Mysuru	Internal Academician Convener
3	Suresha B HOD, Department of Mechanical Engineering, NIE, Mysuru	External Academician
4	Arun Kumar T S Assistant General Manager, BEML, Mysuru	Industry
5	Ghanraj HOD, Department of Mechanical Engineering, PES, Mandya	Alumni
6	Dr. G Mallesh Professor, Department of Mechanical Engineering, SJCE, Mysuru	Internal Academician Member
7	Rashmi R 5th Semester	Student

Program Assessment Committee – PAC is constituted to assess the academic process of the program.

The following are the roles of the Program Assessment Committee:

Assist in framing Course Outcomes and mapping COs to POs / PSOs.
Contribute in the Teaching Learning Process of the program.
Suggest additional assessment techniques other than CIE.
Verify the course and program attainment process.
Verify the action plans and their attainment in each course.

Program Assessment Committee:

1.Dr. R. Ravishankar

2. Dr. H. Yogish

BOARD OF STUDIES

Sl. No.	Category	Designation	Name of the Person
1	The Dean(s) of the Faculties	Ex-Officio Member	DR. B Manojkumar
	Dean (Engineering & Technology)		DR. S B Kivade
2	Head of the Dept.	Chairperson	DR. R. Ravishankar
3	All Professors of the Department	Members	1	Dr. A.N. Santosh Kumar
3	All Professors of the Department	Members	2	Dr. G Mallesh
4	Two Senior Associate Professors of the concerned Department by rotation	Members	1 2	Sri P Prasad Dr. T Manjunatha
5	One Senior Assistant Professor of the concerned Department by rotation	Member	1	Sri Arun Y C Asst. Professor, Department of Mechanical Engineering, SJCE, Mysuru Mobile No. 7829395884 arunycsjce@gmail.com arunyc@jssstuniv.in
6	One External Subject Expert from any reputed Academic / Research Institution / Other Universities nominated by the Academic Council	Member	1	Dr. Ezhil Vannan Professor, Department of Mechanical Engineering, Malnad College of Engineering, Hassan – 573202 Mobile No. +91 98455 75450 Email ID: evs@mcehassan.ac.in
7	One External subject expert from any reputed Academic/Research Institutions/other Universities nominated by the Vice Chancellor upon recommendation by the Dean of respective faculty.	Member	1	Dr. V V Katti Professor, Department of Mechanical Engineering SDM College of Dharwad +91 9480587316 Email ID: katti.vadiraj@gmail.com
8	Two external members from concerned industry/ Government Departments/ Public Sector undertakings/ allied area relating to placement, nominated by the Academic Council upon recommendation by the Dean of respective faculty.	Members	1	Mr. Navaneetha Navakana Vice President and HOD – Chassis Systems and Processes, Mercedes Benz India (R&D) India Private Limited, Embassy Crest Phase 1, Near Sathya Sai Hospital, Whitefield Road, Bengaluru 560066 Phone: +91 80 6149 4500 Mobile: +91 98450 82820 e-mail: navaneetha.navakana@daimler.com
8		Members	2	Dr. N. Nagesha Professor and Dean Department of Industrial Production Engineering UBDT, Davanagere – 5770044 Ph; 9480177168 Email: nnvebs@gamil.com
9	One postgraduate meritorious alumnus, to be nominated by the Head of the Department.	Member	1	Dr. SRINIVASA PAI.P. Professor & Deputy Controller of Examination, NMAMIT, Nitte, KarkalaTaluk. Udupi 574110 E-mail: srinivasapai@nitte.edu.in Mobile No. 94482 96723
10	The Chairperson, Board of Studies, may with the approval of the Vice Chancellor, Co-opt as Members: One external subject expert from reputed Academic/ Research Institution/Other Universities/Industry/ Government departments/ public sector undertakings, whenever special courses of studies are to be formulated.	Members	1	Mr. VISHWA KUMAR R Director, ASKAR MICRONS (P) Ltd., Plot No. 293 C Hebbal Industrial Area, Mysuru 570016 Phone: +91 821-4006243 Cell: +91 96111 16983 rvishwakumar@askarmicron.co.in
	b. Two other members of faculty of the concerned Department.		1	Dr. T. Manjunatha Associate Professor, Department of Mechanical Engineering, SJCE, Mysuru-570006. Mobile No. 7760690930 manjunatha_td@yahoo.co.in me.tm@sjce.ac.in
			2	Dr. H YOGISH, Associate Professor, Department of Mechanical Engineering, SJCE, Mysuru-570006. Mobile No. 94837 43972 hy.sjce@gmail.com dr.hy@sjce.ac.in

Department Internal Committee

Quality Monitoring and Administration Committee (QMAC):

Sri. V. Basavaraj

2.Sri. P. Prasad

Teaching and Learning Committee (TLC):

1.Mrs.Tejaswini M N

2.Mrs.Bindhu A S

Academic Committee (AC):

1.Dr. R. Ravishankar

2.Dr. Mahesh.V.M

Department Support Activities Committee (DSAC):

1.Sri. Y.C. Arun

2.Mr. Abhinanadan M S

Research & Development Committee (RDC):

1.Dr. R. Ravishankar

2.Dr. H. Yogish

Laboratory Development Committee (LDC):

1.Ms. U. Bhavana

2.Mr. Karthik. M S

Time table committee (TTC):

1.Dr. H. Yogish

2.Sri. N.S. Kumaraswamy

ERP committee:

1.Mr. Pradeep Kumar V G

2.Mr. Karthik. M S

Mentoring System

USN	NAME	SECTION	FACULTY
01JST17ME061	RAKSHITH IYER	5th – A	TEJASWINI M N
01JST18ME005	ADITYA HIREMATH
01JST18ME085	SRI GANESH
01JST18ME089	SUHAS B M
01JST18ME096	VARUN B
01JST19ME004	AKASH H G
01JST19ME005	AMOGHAVARSHA
01JST19ME008	ANANYA RAJ D K
01JST19ME009	ANEESH H N
01JST19ME011	ANURAG KULDEEP
01JST19ME012	ANUSHA M B	5th – A	BINDHU A S
01JST19ME014	ARUN N
01JST19ME018	BHOOMIKA T K
01JST19ME019	CHANDAN KUMAR SAH
01JST19ME021	CHANDRA SAMEERANA M
01JST19ME024	CHINTHANA T
01JST19ME025	DAKSHAYINI L
01JST19ME027	DENISH RAJU
01JST19ME034	JOEL ANTONY
01JST19ME036	KARTHIK P
01JST19ME038	KIRAN KUMAR H V	5th – A	KARTHIK M S
01JST19ME040	KUSHAL A S
01JST19ME041	LAKSHITHA S
01JST19ME044	MOHAMMED FURKHAN SHEIKH
01JST19ME046	NANDAN KUMAR M M
01JST19ME048	NAVANEETH D
01JST19ME049	NIKHIL CHINMALLI
01JST19ME051	NISHANT PATIL
01JST19ME053	PADMANABHA M
01JST19ME055	POORNACHANDRA H R
01JST19ME056	PRAJWAL MUTHANNA C	5th – A	BHAVANA U
01JST19ME057	PRAMOD C M
01JST19ME062	PUNEETH H M
01JST19ME066	RAKESH C L
01JST19ME067	RAKESH P
01JST19ME068	RAMESH K L
01JST19ME069	RASHMI R
01JST19ME071	ROCHAN KASHYAP
01JST19ME073	RUTHVIK A KARET
01JST19ME074	SACHIN SHIVANAND JOGIN
01JST19ME075	SAHANA D KOTI	5th – A	ABHINANDAN M S
01JST19ME077	SAMPREETH P
01JST19ME078	SANJAY HEGADE B M
01JST19ME080	SHAILAJA T R
01JST19ME085	SHREEDHAR PRABHAKAR
01JST19ME087	SHUSHRUTH S
01JST19ME088	SIDDARTHA R
01JST19ME091	SURYA Y C
01JST19ME096	TARUN GOWDA N M
01JST19ME097	TEJAS M L
01JST19ME102	VARUNKUMAR	5th – A	Madhukumar K C
01JST19ME106	VINAY M M
01JST19ME107	YOGESH N G
01JST20ME400	AMBAREESH
01JST20ME401	ARUN M C
01JST20ME402	ASHISH WAGHAMARE
01JST20ME403	BALAJI N
01JST20ME404	BALAKRISHNA S
01JST20ME406	CHANDAN B R
01JST20ME407	DAYANANDA SAGAR
01JST20ME409	DIXITH R	5th – A	SANTOSH C
01JST20ME410	HAMSALEKHA C
01JST20ME412	KUMARSWAMY R
01JST20ME413	M S BRUHASPATHI
01JST20ME416	NANDAN KUMAR K
01JST20ME424	TEJAS A V
01JST20ME425	Thejas N M
01JST20ME426	YOGESH K M
01JST18ME070	SAGAR H P	5th – B	KUMAR M
01JST19ME002	AAFREEN FATHIMA
01JST19ME007	ANAND
01JST19ME010	ANMOL
01JST19ME013	ARUN G
01JST19ME015	ARYAN K PRADHAN
01JST19ME016	ARYAN RAGHAVENDRA
01JST19ME017	ASHPAK KANAVI
01JST19ME020	CHANDAN TP
01JST19ME022	CHANDRAKIRAN
01JST19ME023	CHINNU B	5th – B	BHAVANA U
01JST19ME026	DARSHAN RA0
01JST19ME028	DHANUSH D
01JST19ME029	DIVYANSHU
01JST19ME032	GOPALAKRISHNA KC
01JST19ME035	KAJAL RAVINDRA
01JST19ME037	Karthik R
01JST19ME039	KULKARNI RONIT RAGHUNATH
01JST19ME043	MOHAMMED FARHAN
01JST19ME045	MOHITH MANJUNATHA GUNAGA
01JST19ME050	NISHAN G	5th – B	MADHUKUMAR K C
01JST19ME052	NIYOG MOHAN K
01JST19ME058	PRAMOD TP
01JST19ME059	PRASHASTH MADHUSUDHAN
01JST19ME060	PREM C KIKKERI
01JST19ME061	PRIYANKA
01JST19ME063	QHUDWA SARMAD
01JST19ME064	RAJESH KUMAR G
01JST19ME065	RAJU
01JST19ME070	ROBERT
01JST19ME072	ROHAN	5th – B	VASANTH KUMAR H
01JST19ME076	SAKSHATHA
01JST19ME082	SHASHANK GOWDA B.T
01JST19ME083	SHASHANK.M
01JST19ME084	SHASHWATH M NEELSAGAR
01JST19ME086	SHREYA
01JST19ME089	SOMANNA A.A
01JST19ME093	SYED FAIZAAN AHMED
01JST19ME094	SYED MEER SHEEZAN
01JST19ME099	ULLAS
01JST19ME100	VARUN KUMAR K	5th – B	MADHUKUMAR K C
01JST19ME101	VARUN NARASIMHASWAMY KASA
01JST19ME103	VASUDEV BHAVESH PAWAR
01JST19ME105	VIGNESH K M
01JST19ME109	NITHESH L
01JST20ME405	C Mahanteshprasad
01JST20ME408	Dhanush c.k
01JST20ME411	Kanishk P Suthur
01JST20ME414	Madhusudhan C P
01JST20ME415	Manoj Kumar R
01JST20ME417	Pramod S	5th – B	KARTHIK M S
01JST20ME418	Prasad
01JST20ME419	Praveen C
01JST20ME420	Rakesh M
01JST20ME421	Sarfaraz Ahamed TS
01JST20ME422	Shamath H V
01JST20ME423	Shashidhar K A
01JST16ME084	Sukeerth	7th – A	KARTHIK M S
01JST16ME097	Vikhyath B H
01jst16me106	Yashas M N
01JST17ME070	Sagar Kadam
01JST18ME001	A MADHAVA
01JST18ME002	Abhay S Nadig
01JST18ME003	Abhishek Santosh
01JST18ME007	Akshay KKP
01JST18ME008	Akshay KUMAR
01JST18ME011	AMMAR SYED MOHAMMED
01JST18ME013	ANKITH MAHADEV	7th – A	KUMAR M
01JST18ME018	Baswasagar
01JST18ME019	Bharath K S
01JST18ME021	Chandrababu H
01JST18ME023	Chiragh
01JST18ME024	DARSHAN.K
01JST18ME027	Devavratha L
01JST18ME029	Divith
01JST18ME030	Gagan s
01JST18ME032	GNANESH V M
01JST18ME034	HARSHITHKUMAR K M	7th – A	Y C ARUN
01JST18ME035	HEMANTH
01JST18ME036	Hemanth S
01JST18ME038	Keerthan J
01JST18ME042	MADHUSUDHAN J S
01JST18ME046	Mohamad Ehthesham S
01JST18ME047	Mohith DS
01jst18me049	Nagaraju M
01JST18ME050	Nandan R
01JST18ME053	Nijaguna
01JST18ME058	PRASHANTH R	7th – A	N S KUMARSWAMY
01JST18ME060	PRITHVI S
01JST18ME061	Rakshith S
01JST18ME067	S Pranav Simha
01jst18me073	Sandesh hiremath
01JST18ME075	Santhosh Kumar N
01JST18ME077	SATWIK MISHRA
01JST18ME078	SHARATH GOWDA D C
01JST18ME081	Shawaiz Akhter
01JST18ME086	Srivatsa D.S
01JST18Me091	SUMUKHA N SHRMA	7th – A	SANTOSH C
01JST18ME093	Suvaas S L
01JST18ME098	VIKAS V BHAT
01JST18ME099	Vikram K R
01JST18ME103	Vishnu M R
01jst18me104	Yashavantagouda M
01JST18ME105	YASHWANTH M
01jst19me404	Ashwin.p
01JST19ME405	CHANDAN.N
01JST19ME406	Darshan D S
01JST19ME412	M.Siddharth	7th – A	VASANTH KUMAR H
01jst19me413	Mahesh s
01jst19me414	Nagaraja uttangi
01JST19ME416	SUBRAMANIRAJU.M
01JST19ME417	SUHAS RAO P S
01jstme16418	Suhas varma
01JST19ME419	vignesh Prasad M
01JST16ME081	Siddanth Patil	7th – B	MAHESH V M
01JST17ME025	DEEPAK PRADHAN
01JST17ME039	KOUSHIK H M
01JST17ME050	NEERAJ NAVEEN
01JST17ME062	RATNADEEP DP
01JST17ME084	SHASHANK S
01JST18ME004	ADITYA PONNAPA
01JST18ME006	AJAYKUMAR AM
01JST18ME009	AMBATI RAKSHITH
01JST18ME010	AMBIKA S
01JST18ME012	ANAND GN	7th – B	PRADEEP KUMAR V G
01JST18ME014	AYUSH RANJAN
01JST18ME015	B M PRUTHVIN
01JST18ME017	B SANKETH
01JST18ME020	BHIMASHANKAR
01JST18ME025	DARSHANA H M
01JST18ME026	DEEPAK T
01JST18ME028	DEVIKA R SINGH
01JST18ME031	GIRISH V A
01JST18ME033	HARISH M B
01JST18ME041	KARTHIK N	7th – B	BHAVANA U
01JST18ME043	MANAV I K
01JST18ME044	MANISH KRISHNA
01JST18ME045	MANISH VERMA
01JST18ME051	NAYANA MR
01JST18ME052	NIDARSH PRAJAY
01JST18ME054	NITISH SAVALAGI
01JST18ME055	OMER KHAN
01JST18ME056	POOJA GB
01JST18ME057	PRASAD
PRATEEK RB	01JST18ME059	7th – B	KUMAR M
RANJAN A N	01JST18ME062
RANJINI MD	01JST18ME063
ROHAN M	01JST18ME065
ROHITH R	01JST18ME066
SACHIN YADAV	01JST18ME068
SACHIN KUMAR	01JST18ME069
SAI SUJITH	01JST18ME071
SAMARTH R HEGDE	01JST18ME072
SANJAY C	01JST18ME074
01JST18ME076	SANTOSH JAMBAGI	7th – B	KARTHIK M S
01JST18ME079	SHASHANK BH
01JST18ME080	SHASHANK B RAJ
01JST18ME082	SHREESHA R
01JST18ME083	SHUBHAM SOURAV
01JST18ME084	SINDURA SHREE
01JST18ME087	SUBHASH RAJU MK
01JST18ME088	SUDARSHAN JV
01JST18ME092	SUSHIL GOWDA
01JST18ME094	SWARUP R
01JST18ME095	THYAGARAJ BS	7th – B	ABHINANDAN M S
01JST18ME097	VIJETH K S
01JST18ME100	VINEETH KV
01JST18ME101	VINOD D
01JST18ME106	YATHIN GOWDA
01JST18ME107	AISHWARYA B
01JST18ME108	N LILEKHA
01JST18ME109	NACHIKETH M S
01JST18ME110	SAGAR M
01JST19ME400	ABHISHEK SALIMAT
01JST19ME401	AJAY KUMAR AM	7th – B	VASANTH KUMAR H
01JST19ME402	AKASH KULLI
01JST19ME403	ARNOLD D’SOUZA
01JST19ME407	DHANYAN A
01JST19ME408	GANESH
01JST19ME409	GOWTHAM
01JST19ME410	GURUPRASAD GM
01JST19ME411	JASWANTH S
01JST19ME415	NAVANITHIN SINGH
01JST19ME420	VIKAS S

INFRASTRUCTURE FACILITY

Details of Lab facilities

Name of the Laboratory	Name of the Important Equipment
BASIC MATERIALS TESTING LABORATORY	Universal Testing Machine Tension Test Compression Test Bending Test Shear Test Impact Testing Machine Charpy Test Izod Test Torsion Testing Machine Hardness Testing Machines Brinell Hardness Testing Machine Rockwell Hardness Testing Machine Vickers Hardness Testing Machine
BOSCH-REXROTH LABORATORY	Hydraulic Stations Pneumatic Stations Sensorics and PLC Components Automation and Robotic Stations
CAD/CAM LABORATORY	Workstations Softwares Solid Edge UG NX ANSYS SPSS Ideation Brainstorming Innovation Workbench Software
DESIGN LABORATORY	Journal Bearing Test Rig Static and Dynamic Balancing of Rotating masses Hartnell Governor Critical speed of rotating shaft Spring- Mass Damper system Torsional Viscous Damper Photo Elastic Test setup Gyroscopic Test setup (Demo)
ENERGY CONVERSION ENGINEERING LABORATORY	Abel Pensky – Flash and Fire Apparatus Pensky Martin – Flash and Fire Apparatus Cloud and Pour Point Apparatus Saybolt Viscometer Redwood Viscometer Digital Type Electronic Weighing Machine Steam Engine Model Model of 4-S engine Model of 2-S engine Model of Lancashire Boiler Model of Babcock Wilcox Boiler Boy’s Gas Calorimeter Bomb Calorimeter
FITTING SHOP AND POWER TOOL LABORATORY	Fitters Bench Vice Taps and Die Set Box Files Heavy Duty Leg Vice 1/2” Pipe Thread Cutter 3/4″ Pipe Thread Cutter 1” Pipe Thread Cutter Cutting tools and measuring instruments Power Tools Hammers
FORGING & SHEET METAL SHOP	Tool grinder Open hearths Anvils Swage blocks Hollow bits Tongs Sledge hammer (8 pounds) Sledge hammer (10 pounds) Sledge hammer (14 pounds) Ball peen hammers
FOUNDRY SHOP	Permeability Tester Core Hardness Tester Moulding Sand Hardness Tester Compression Strength Tester
HEAT AND MASS TRANSFER LABORATORY	Thermal Conductivity of a Metal Rod Test Setup Thermal Conductivity of a Liquid Test Setup Thermal Conductivity of Composite Wall Test Setup Thermal Conductivity of Insulating Material Test Setup Effectiveness of Metallic Fin Test Setup Natural Convection of Heat Over Vertical Tube Test Setup Forced Convection of Heat Through A Pipe Test Setup Critical Heat Flux Test Setup Emissivity of Surface Test Set Up Stefan Boltzman Constant Test Setup Parallel Flow and Counter Flow Heat Exchanger Test Set Up Vapour Compression Refrigeration Test Rig Air – Conditioning Test Rig
MACHINE SHOP LABORATORY	Engine Lathes Drilling Machines Milling Machines Shaping Machines Planning Machine Grinding Machines CNC Turning Centre CNC Machining Centre
METROLOGY & MEASUREMENTS LABORATORY	Toolmaker Microscope Autocollimator Lathe Tool Dynamometer Tally surf/mechanical Comparator Profile Projector
WELDING SHOP LABORATORY	Electric Arc Welding Portable Arc Welding TIG Welding MIG Welding Oil Cooled Transformer Air Cooled Transformer Pillar Drilling Machine Area = 698 Sq.m

Classroom

Department has spacious class rooms with adequate seating capacity. Each class room is provided with a Computer system, LCD Projector with screen facility for Audio/ Visual purpose. In addition Green glass boards and Podium are provided in each class room.

Know Your Faculty

TEACHING FACULTY

	Faculty Name	Qualification (Specialization)	Design.	Exp. Yrs	DOJ	Nature of Association	Profile	Email-Id (JSS STU)
1.	Dr. R. Ravishankar	Ph.D. Thermal Engineering	Assoc. Professor & Head	19	23/02/2003	Regular		ravishankar.r@jssstuniv.in
2.	Dr. A.N. Santhosh Kumar	Ph.D. Engineering Management	Professor	35	16/06/1986	Regular		ansantoshkumar@jssstuniv.in
3.	Dr. T. Manjunatha	Ph.D. Production engineering and system technology	Asso. Professor	18	11/2/2004	Regular		tmanjunath@jssstuniv.in
4.	Dr. G. Mallesh	Ph.D. Design Engineering	Professor	23	24/11/2008	Regular		malleshgowder@jssstuniv.in
5.	Sri. V. Basavaraj	M.Tech Engineering Management	Asso. Professor	32	01/09/1990	Regular		basavaraj.v@jssstuniv.in
6.	Dr. H. Yogish	Ph.D. Thermal Engineering	Asso. Professor	22	10/04/2000	Regular		yogish.h@jssstuniv.in
7.	Sri. N.S. Kumaraswamy	M.Tech Thermal Engineering	Asst. Professor	7	31/08/2015	Regular		nskumaraswamy@jssstuniv.in
8.	Dr. Mahesh.V.M	Ph.D. Machine Design	Asst. Professor	5	01/06/2017	Regular		maheshvm@jssstuniv.in
9.	Sri. Y.C. Arun	M.Tech Thermal Engineering	Asst. Professor	8	02/06/2014	Regular		arunyc@jssstuniv.in
10.	Mr. Abhinanadan MS	M.Tech Engineering Management	Asst. Professor	4	27/08/2018	Regular		ams@jssstuniv.in
11.	Mrs.Tejaswini M N	M.Tech Machine Design	Asst. Professor	3	03/09/2019	Regular		thejaswinimn@jssstuniv.in
12.	Mrs.Bindhu A S	M.Tech Engineering Management	Asst. Professor	6	08/11/2016	Regular		bindhupatel@jssstuniv.in
13.	Ms. U. Bhavana	M.Tech Engineering Management	Asst. Professor	8	07/08/2014	Regular		bhavana.umanath@jssstuniv.in
14.	Mr. Karthik. MS	M.Tech Thermal Engineering	Asst. Professor	4	27/08/2018	Regular		karthikms@jssstuniv.in
15.	Dr. Pradeep Kumar V G	Ph.D. Machine Design	Asst. Professor	7	03/08/2015	Regular		pvg@jssstuniv.in
16.	Mr.Madhukumar K C	M.Tech CAMS	Asst. Professor	3	3/09/2019	Contract		madhukumar577@gmail.com
17.	Dr. Neetha K	Ph.D. Maintenance Engineering	Asst. Professor	5	2/1/2020	Regular		neethu.blu@gmail.com
18.	Mrs. Bhavya	M.Tech Machine Design	Asst. Professor	1	5/01/2021	Contract		bhavyav041@gmail.com
19.	Mr. Kumar M	M.Tech Engineering Management	Asst. Professor	6	3/07/2016	Contract		kumar.m@jssstuniv.in
20.	Mr. S G Channabasavanna	M.Tech Machine Design	Asst. Professor	4	08/01/2021	Regular		channasg1994@gmail.com
21.	Dr. Manjunatha H S	Ph.D. Composite Materials	Asst. Professor	12	15/01/2021	Contract		manjuhs.hsn@gmail.com
22.	Tejas M R	M.Tech Maintenance Engineering	Asst. Professor	01	15/5/2023	Contract		metejas@jssstuniv.in

TECHNICAL STAFF

#	Name	Qualification	Designation	Exp.Yrs	Email-ID
1	Medappa Nayaka P	ITI	Instructor	19
2	Rajanna.C	DME	Instructor		crajanna58@gmail.com
3	Madhu.D	DME	Instructor	5	dmadhukiran6@gmail.com
4	Kumar M	DME, BE, M.Tech	Asst. Instructor	13	kumar.jce@gmail.com
5	Manisha N	DME(MTT)	Asst. Instructor	13	manishbegor@gmail.com
6	Manjunath. N	ITI	Asst. Instructor	13	mmmanjuashu793@gmail.com
7	Narasimha	ITI NCVT	Asst. Instructor	13	narasimhaenv@gmail.com
8	Madesh. N	PUC	Mechanic
9	Manu H.K.	DME	Instructor
10	Rohith N	BE	Instructor
11	Nandeesha	DME	Instructor	3	nandeeshas05@gmail.com
12	Devaraju	ITI	Mechanic

SUPPORTING STAFF

#	Name	Qualification	Designation	Exp.Yrs	Email-ID
1	Yogish. K.S	ITI	Helper
2	Rajesh. S	PUC	Helper	33
3	Veerabhadrachar	ITI	Helper	30
4	Nagesh. G. S	ITI	Helper
5	R.N. Narayanaswamy	9 TH	Helper
6	M. Rangaswamy	DME, B.E	Helper	13
7	Shivakumara. B	ITI, MA, M L I S C, B.Ed.	Helper	16
8	Vijaya M.N	DME B.E,	Helper	6
9	Vinay R	ITI	Helper
10	Rachappa Swamy	ITI	Helper
11	Shivakumara. A	7th	Helper
12	Subrhamani. K	–	Sweeper

Gallery

Curriculum & Timetable

UG Scheme and Syllabus

PG Scheme and Syllabus

22322 Revised MTECH_MMT

UG First Year Scheme and Syllabus -MP

UG Time Table

PG Time Table

FDPS /CONFERENCES / WORKSHOPS ORGANIZED

Academic Year 2020-21

Sl.No	Name of the FDP/Conference/Workshop Organized	Date
1	Five Days Online FDP on “Modeling and Simulation of Structural Mechanics and CFD Analysis using MATLAB and ANSYS”	24-08-2020 to 28-08-2020
2	One Day Webinar on “Additive Manufacturing, 3D Printing and its Applications”	08-08-2020
3	Three Days Webinar on “Engineering Management & Entrepreneurship”	05-08-2020 to 07-08-2020
4	Three Days Webinar on “Engineering Management & Entrepreneurship – Series II”	01-09-2020 to 03-09-2020
5	Three Days Webinar on “Cryogenics and its Applications”	12-08-2020 to 14-08-2020

Academic Year 2019-20

Sl.No	Name of the FDP/Conference/Workshop Organized	Date
1	One Day Webinar on “Automation Smart Factory”	22-07-2020
2	1 Day Webinar on “Concepts and Design of HVAC System”	02-07-2020

Academic Year 2018-19

Sl.No	Name of the FDP/Conference/Workshop Organized	Date
1	Five Days Workshop on “CNC Training and CAE”	01-08-2019 to 05-08-2019
2	Five Days Workshop on “Engineering Graphics and Design-Teaching Methodology and Evaluation Procedure”	8-7-2019 to 12-7-2019
3	One Day Workshop on “Six Sigma and Lean Manufacturing”	23-3-2019

Academic Year 2017-18

Sl.No	Name of the FDP/Conference/Workshop Organized	Date
1	Two week GIAN program on “Application of Finite Element Methods in Design and Development of Mechanical Components”	16-07-2018 to 27-07-2018

DEPARTMENT Official Student Club

Mechanical Engineering Association (MEA)
Society of Automotive Engineers (SAE)

RESEARCH INITIATIVES

Research Guides and Areas Available for Ph.D Programs

#	Research Guide	Area of Specialization
1.	Dr. R. Ravishankar	Thermal Engineering
2.	Dr. A.N. Santosh Kumar	Engineering Management
3.	Dr. T. Manjunatha	Production engineering and system technology
4.	Dr. G Mallesh	Design Engineering
5.	Dr. H. Yogish	Thermal Engineering
6.	Dr. Mahesh V.M.	Machine Design

Research scholar Pursuing Ph.D under JSS STU, Dept

#	Guide	Research Scholar (Full/Part Time)	Research Topic	Registration Year	Status
1.	Dr. R. Ravishankar	Mr. Arun Y. C. (Part time)		2020	Ongoing
2.	Dr. R. Ravishankar	Mr. S G Channabasavanna (Part time)	Wire Arc Additive Manufacturing	2021	Ongoing
3.	Dr. Rudramurthy	Mr. Mohamad Aziz Athani (Part time)		2020	Ongoing
4.	Dr. A.N. Santosh Kumar	Mr. Abhinandan M S (Part time)		2020	Ongoing
5.	Dr. A.N. Santosh Kumar	Mr. Honna Prabhu Linge Gowda B M (Part time)		2020	Ongoing
6.	Dr. A.N. Santosh Kumar
7.	Dr. T. Manjunatha
8.	Dr. T. Manjunatha
9.	Dr. G Mallesh	Mr. Pavan Kumar R (Full time)		2020	Ongoing
10.	Dr. G Mallesh	Mr. Kuberappa (Part time)		2021	Ongoing
11.	Dr. H. Yogish	Mr. Dayananda Murthy T (Full time)		2020	Ongoing
12.	Dr. H. Yogish	Mr. Ravindra B S (Part time)		2020	Ongoing
13.	Dr. Mahesh V.M.	Mr. Rajesh Murali (Part time)		2020	Ongoing
14.	Dr. Mahesh V.M.
15.	Dr. R. Srinidhi	Mr. Pruthvi C (Part time)
16.	Dr. R. Srinidhi	Mr. Prasanta Kumar Samal (Part time)
17.	Dr. R. Srinidhi
18.	Dr. M S Prabhuswamy	Mr. Rajesh A.S.

Consultancy Details:

Revenue generated from consultancy during the last five years
Name of the teacher consultant	Name of consultancy project	Consulting/Sponsoring agency with contact details	Year	Revenue generated
Dr. H Yogish	Calorific Value and Ash Content of Briquettes	Mysore Dist. Co-operative Milk Producer’s Societies Union Ltd. (MYMUL)	2020-2021	Rs. 61,360
Dr. H Yogish	Calorific Value and Ash Content of Briquettes	Mysore Dist. Co-operative Milk Producer’s Societies Union Ltd. (MYMUL)	2019-20	Rs. 56,640
Dr. H Yogish	Calorific Value and Ash Content of Briquettes	Mysore Dist. Co-operative Milk Producer’s Societies Union Ltd. (MYMUL)	2018-19	Rs. 56,640
Dr. H Yogish	Calorific Value and Ash Content of Briquettes	Mysore Dist. Co-operative Milk Producer’s Societies Union Ltd. (MYMUL)	2017-18	Rs. 53,724
Dr. H Yogish	Calorific Value and Ash Content of Briquettes	Mysore Dist. Co-operative Milk Producer’s Societies Union Ltd. (MYMUL)	2016-17	Rs. 39,144

Collaborations and Outcomes

Interdisciplinary/multidisciplinary collaboration is a key for success in the research. The department has national and international collaborations from academic and research institutions.

The thrust area for research activities carried out in the department includes

Sl no	Title of the Paper	Authors	Journal Name with ISSN Number	Journal Details	IF
1

PLACEMENTS

Particulars	2020-21	2019-20	2018-19	2017-18	2016-17
No of students	120		68
No of students placed		54	28	45
Higher studies	04	09	12	12

Placement Statistics

EXTRA-CURRICULAR ACTIVITIES

Students of the department are encouraged to participate in various co-curricular and extra-curricular activities. They are also encouraged to participate in intercollegiate fests and competitions.

DISTINGUISHED ALUMNI

Distinguished Alumni list

#	Name	Designation	Company/Institution	City
1.	Dr. P. Dayananda Pai	Syndicate Member	NITK, Surathkal and Manipal University	Managlore
		Trustee	BMS Educational Trust	Bengaluru
		Chairman	BMS College of Engineering	Bengaluru
2	D.N.Manik	Professor	IITB	Mumbai
3	Jambaradi Mahesh Kumar	CTO	Excel Soft
4	Lohith Urs	International Rallyist
5	Prasanna B	Director , R&D	Mercedes Benz	Bengaluru
6	P.Baligar	Director	Toyota Kirloskar Motor Limited,	Bengaluru
7	Suresh Babu	Vice President	BOSCH
8	S.NanjundaSwamy	Dy.GM	BEML	Mysuru
9	Naresh V Murthy	Director	Babcock & Wilcox	USA
10	H.P. Ram Mohan	Executive Director/Outstanding Scientist, Directorate of Engineering	Nuclear Power Corporation of India Limited	Mumbai
11	Arun Kumar Kembhavi	IAS, Joint Secretary to Chief Minister of Meghalaya		Shillong

Entrepreneurs

#	Name	Designation	Company	City
1	Dr. P. Dayananda Pai
2	Satish Pai
3	Satvik Sandesh
4	Srikanth Das
5	Vishwakumar	Director

PUBLICATIONS

Faculty members and research scholars undertake research work along with their regular teaching workload. They have published around 100+ Articles in Journals / Conferences. Some of the quality publications are listed here.

Papers published in last Five years:

International Journals	International Conferences
96	21

Publication Details

JOURNAL PUBLICATIONS

2021-2016

Journal Publication 2021

Sl No.	Publication
1.	Harshavardhan B., Ravishankar R., Suresha B., Srinivas S., Arun C. Dixit U (2021). Influence of short carbon fiber content on thermal properties of polyethersulfone composites, Material Today: Proceedings, vol. 43 (2), 1268-1275
2.	B. Harshavardhan, R. Ravishankar, B. Suresha and S. Srinivas (2021). Experimental and numerical modal analysis of short carbon fiber reinforced polyethersulfone composites, IOP Conf. Series: Materials Science and Engineering, vol. 1189, 012017
3.	Harshavardhan B., R. Ravishankar, B. Suresha, and Arun C. Dixit U (2021). Elastic modulus measurement of thermoplastic composites through modal analysis, IOP Conf. Series: Materials Science and Engineering, vol. 1189, 012020
4.	B. Harshavardhan, Ravishankar R, Suresha B, Srinivas S,Arun C. Dixit U (2021). Thermal characterization of polyethersulfone composites filled with self-lubricants. Materials Today: Proceedings, vol. 43(2), 1258-1267
5.	Arun C. Dixit, B. Harshavardhan, R. Ravishankar, S.Gururaja, K.G. Vismay (2021). Effect of dry sliding wear parameters on the tribological behaviour of aluminium hybrid metal matrix composites, Materials Today: Proceedings, vol. 43(2) 2194-2197
6.	N.I. Jamadar, S.B. Kivade, K.K. Dhande, Khaleefah Manhal and Rakesh Roshan (2021). Modal Strain Energy based Crack Inspection in Mono Composite Leaf Spring, Journal of Failure Analysis and Prevention, vol. 21, 1297–1304
7.	S.B. Kivade, Amaresh Gunge, M. Nagamadhu & Sangamesh Rajole (2021). Mechanical and dynamic mechanical behavior of acetylation-treated plain woven banana reinforced biodegradable composites, Advanced Composites and Hybrid Materials, https://doi.org/10.1007/s42114-021-00247-8
8.	S.B. Kivade, M Nagamadhu (2021). Effect of multifrequency, boundary conditions of Polyvinyl Alcohol (PVA) crosslinked with Glutaraldehyde (GA) using dynamic mechanical analyser, Advances in Materials and Processing Technologies. https://doi.org/10.1080/2374068X.2021.1878698
9.	Sachinkumar Patil, M. Nagamadhu, K. Anand Babu, S.B. Kivade, T. Veerabhadrappa, Analysis of Effect of Machining Parametes on Surface Roughness and MRR of AA3003/SiC Composite Material, Sustainable Machining Strategies for Better Performance. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-2278-6_19
10.	M. Nagamadhu, S.B. Kivade (2021). Novel Studies on Thermo-Mechanical Properties of Structural Glass with and without Lamination, Applied Mechanics and Materials, vol. 903, 65-72
11.	K.M. Rakesh, Srinidhi Ramachandracharya, S Gokulkumar, K.S. Nithin (2021) Investigation on acoustical properties, thermal stabilities and water sorption abilities of finger millet straw fibers, darbha fibers and ripe bulrush fibers, Material Today: Proceedings, vol. 47(15), 5268-5275
12.	H.S. Manjunatha, V.T. Satish, G Mallesh (2021). Wear Behavior of Aluminum-TiB2 Metal Matrix Composites using Taguchi Method, IOP Conference Series: Materials Science and Engineering. vol. 1189, 012007
13.	M.L. Puneeth, G Mallesh (2021). Dynamic contact behaviour of asymmetric spur gear, Material Today: Proceedings, vol. 44(1), 2019-2027
14.	M.L. Puneeth, G Mallesh (2021). Static contact behaviour of asymmetric spur gear, Material Today: Proceedings, vol. 47(11), 3095-3104
15.	Suresh Kumar. D, Sanjeevamurthy, G. Mallesh (2021). Effect of Graphite Addition on Mechanical and Tribological Properties of Sisal–Glass FRP Composites, International Journal of Recent Technology and Engineering, vol. 10(1), 256-264
16.	Kumar V., Mallesh G., Radhakrishna K.R. (2021). Finite Element Analysis of a Two-Post Rollover Protective Structure of an off-Highway Motor Grader, Trends in Mechanical and Biomedical Design. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4488-0_31
17.	Mallesh G., Pavankumar R., V.G. Pradeep Kumar, Naik L.L. (2021) Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites. In: Vijayan S., Subramanian N., Sankaranarayanasamy K. (eds) Trends in Manufacturing and Engineering Management. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4745-4_16
18.	Pradeep Kumar V.G., Mallesh G. (2021). A Review on Bending Strength of Asymmetric Gear, International Journal for Research in Applied Science & Engineering Technology, vol. 9(8), 2263-2267
19.	Bindhu A.S., Manjunatha B, Neetha K (2021). Optimization of a plant layout for the forklift movement for a coffee plant, Psychology and Education, vol. 58(5), 126-129
20.	N. Jayananda, Nikhil M, Shreyas P.B, Ananya T.R, S.G. Channabasavanna, Prabodh Sai Dutt R, T. Venkate Gowda (2021). Low-Cost Automatic Hand Sanitizer Dispenser: Developed and Dispatched Against the COVID-19 Pandemic in India, Journal of Emerging Technologies and Innovative Research, vol. 8(8), 76-82
21.	S. Mohan Kumar, A. Rajesh Kannan, N. Pravin Kumar, R. Pramod, N. Siva Shanmugam, A.S. Vishnu and S.G. Channabasavanna (2021).Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material, Journal of Materials Engineering and Performance, 30, 5692–5703
22.	A. Rajesh Kannan, S. Mohan Kumar, R. Pramod, N Siva Shanmugam, M. Vishnukumar, S.G. Channabasavanna (2021). Microstructure and Corrosion Resistance of Ni-Cu Alloy Fabricated through Wire Arc Additive Manufacturing, Materials Letters, vol. 308, 131262
23.	Ayush Ranjan, Ambati Rakshith (2021). Analysis of Industrial Gas Turbine Blade, International Research Journal of Engineering and Technology, vol. 8(5), 4247-4251

Journal Publication 2020

Sl No.	Publication
1.	B.S. Suresh, C. Prithvi, Srinidhi Ramachandracharya (2020). Modal analysis of FIAT Bogie of LHB railway coach, Material Today: Proceedings, vol. 27(2), 1889-1893
2.	B.S. Suresh, C. Prithvi, Srinidhi Ramachandracharya (2020). Static Analysis of LHB Railway Coach with FIAT Bogies, International Journal of Research in Engineering, Science and Management, vol. 3(3), 348-351
3.	Prithvi C, Srinidhi Ramachandracharya, Karthik Hebbar A (2020). Vibration Analysis of Railway Wagon Suspension System for Improved Ride Quality using MATLAB Simulink, Operations Management and Systems Engineering, Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. pp. 95-112 https://doi.org/10.1007/978-981-15-6017-0_6
4.	Rakesh K.M., Sujith N.S., Srinidhi Ramachandracharya (2020). Acoustical Properties of Secondary Fibre-Based Natural Materials and Their Composites – A Brief Study, Manufacturing Engineering, Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. pp.431-448 https://doi.org/10.1007/978-981-15-4619-8_32
5.	Bhavana Umanath and A.N. Santosh Kumar (2020). Risk Maturity Model Framework for Enterprise Risk Management – A Review, Studies in Indian Place Names, vol. 40 (40), 1620-1623
6.	Sunil Gaekwad and Santosh Kumar A.N. (2020). Improvement in properties of Chromium Coated ABS Parts, International Journal of Mechanical and Production Engineering Research and Development, vol. 10(3), 13109–13118
7.	Sunil Gaekwad and Santosh Kumar A.N. (2020). Influence of Surface Treatment on ABS Parts Printed Using Fused Deposition Modelling, International Journal of Mechanical and Production Engineering Research and Development, vol. 10(3), 9751-9760
8.	Uthappa M.M. and A.N. Santosh Kumar (2020). Impact of Motivational Factors on Project Team Performance, Test Engineering and Management, vol. 83, 5168-5176
9.	Ravishankar S Ulle and A.N. Santosh Kumar (2020). An Insight on Relationship between Total Quality Management Practices and Human Resources Management, International Journal of Creative Research Thoughts, vol 8(6), 413-418
10.	Manjunatha H.S., G. Mallesh, Pradeepkumar V.G. (2020). Mechanical Characterization of Aluminum-TiB2 Metal Matrix Composites by In-Situ Method, International Research Journal of Engineering and Technology, vol. 7, 298-304
11.	G. Mallesh, Pradeep Kumar V.G. (2020). Optimization of asymmetric spur gear tooth, International Research Journal of Engineering and Technology, vol. 7, 363-370
12.	Kumar V, G. Mallesh, Radhakrishna K.R. (2020). Non-Linear Analysis of a Two Post Roll-Over Protective Structure for Motor Grader, International Journal of Engineering and Advanced Technology, Vol. 9(4), 2339-2344
13.	Vasanth Kumar H.S., U.N. Kempaiah, G. Mallesh (2020). Fatigue and Fracture Behavior of Al6061-B4C Aluminium Matrix Composites, International Journal of Engineering and Advanced Technology, vol. 9(4), 2121-2125
14.	Vasanth Kumar H.S., U.N. Kempaiah, G. Mallesh (2020). Fabrication and Tribological Characteristics of Al6061-B4C Metal Matrix Composites, vol. 7, 264-272
15.	Jyothi M.R., H.U. Raghavendra, Prashant C Sunagar, Mahesh V.M., Nruthya K. (2020). Blast Analysis of a 3D Steel Frame Structure, International Journal of Advanced Research in Engineering and Technology, vol. 11(12), pp. 2518-2539
16.	Tilak S.R., Nayeem Ahmed, Anil Kumar B.N. and Yogish H (2020). Effects of Injection Pressure on Performance and Exhaust Emission of CIDI Diesel fuelled with synthesized Biodiesel, Journal of Physics: Conference Series, vol. 1473, DoI:10.1088/1742-6596/1473/1/012038
17.	Karthik M.S., S.A. Mohan Krishna, G.V. Naveen Prakash, K.B. Vinay, K.S. Ravi, Khalid Imran (2020). CFD Analysis based on the Performance Assessment considering Different Shapes of Concentric Orifice Plate subjected to Laminar flow condition, Journal of Advanced Research in Modeling and Simulation, vol. 2(1), 1-7
18.	Krishna Kumar, Puneeth M.L., (2020). Study of Two-Distinct Automotive Bumper Beam Designs during Low Speed Impacts, Journal of Automobile Engineering and Applications, vol. 7(3), 16-28.

Journal Publication 2019

Sl No.	Publication
1.	R Ravishankar, Manjunath T.M., Mahesh V.M., H. Yogish (2019). Effects of Glass and Carbon Fiber Hybridization on Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites, International Journal of Mechanical Engineering and Technology, vol. 10 (1), pp. 475–481
2.	B. Harshavardhan, R. Ravishankar, B. Suresha and S. Srinivas (2019). Static and dynamic mechanical performance of carbon fiber reinforced polyethersulfone composites, Applied Mechanics and Materials, vol. 895, 265-271
3.	Yogesh M, Hari Rao A.N. (2019). Erosion Wear Response of Pineapple Leaf Fiber (PALF) Reinforced Vinylester Composites filled with Flyash: A power plant waste, International Journal of Research in Engineering Application & Management, vol. 5(8), 11-19
4.	Mallikarjunagouda S. Patil, P. Prasad (2019). Improvement of Overall Equipment Effectiveness of Valve Stem Seal Finishing Machine, International Research Journal of Engineering and Technology, vol. 6(8), 678-685
5.	Bhavana Umanath, A.N. Santosh Kumar (2019). Enterprise Risk Management Framework for Small and Medium Enterprises, International Journal of Recent Technology and Engineering, vol. 8(1), 154-156
6.	Uthappa M.M., A.N. Santosh Kumar (2019). A Review on Early Implementation Advantages of Enterprise Resource Planning [ERP] System in Indian Start-up Ecosystem, International Journal of Inventive Engineering and Sciences, vol. 5(2), 13-15
7.	Vasanth Kumar H.S., U.N. Kempaiah, G. Mallesh (2019). Mechanical properties of Al6061–B4C Metal Matrix Composites fabricated by stir casting Process, International Journal of Emerging Technology and Advanced Engineering, vol. 9(7), 33-39
8.	Karthik Hebbar A, Prithvi C, Srinidhi Ramachandracharya (2019). Analytical Modeling of Railway Suspension System using MATLAB Simulink, International Journal of Recent Technology and Engineering, vol. 8(1), 164-168
9.	G Mallesh, Paramesha M, Pradeep Kumar V G, Pavankumar R. (2019). Mechanical Characteristics of CSP Filled Glass-Epoxy Composites, International Journal of Recent Technology and Engineering, vol. 8(3), 896-900
10.	Goutham M, Mahesh V.M., Muralidhara B.K. (2019), Studies on Hybrid Material Reinforced Copper Based Composites- A Review, International Journal of Trend in Scientific Research and Development, vol. 3(2), 302-305

Journal Publication 2018

Sl No.	Publication
1.	B. Suresha, B. Harshavardhan, R. Ravishankar (2018). Tribo-performance of epoxy hybrid composites reinforced with carbon fibers and potassium titanate whiskers, AIP Conference Proceedings, vol. 1943(1), 020069
2.	D.R. Swamy, K.V.A. Balaji (2018). A comparative Study of Human Resource Management Practices and Advanced Technology adoption of SMEs with and without ISO certification, Singapore Management Review, vol. 28(1), 41-60
3.	Rajashekar, Praveen R, Sachin, Shekharkrishna, T. Manjunatha (2018). A study on Mechanical, tribological and Optical microscope behavior of Aluminium 6061–Carbon fiber reinforced metal matrix composite, International Research Journal of Engineering and Technology, vol. 5(8), 395-405
4.	Yogesh M, Hari Rao A.N. (2018). Erosion wear response of pineapple leaf fiber (PALF) reinforced venylester composites filled with Redmud: An aluminium plant waste. International Journal of Engineering Development and research, vol. 6(1), 734-746
5.	Yogesh M., Girish M.N., Hari Rao A.N., and Srinidhi R. (2018). Application of pineapple leaf fiber reinforced venylester based hybrid composite in acoustic barrier, International Journal of innovative research in technology, vol. 5(6), 1-6
6.	Bhavana Umanath and A.N. Santosh Kumar (2018). Importance of Enterprise Risk Management in Corporate Governance – A Review, International Journal of Business and Administration Research Review, Vol. 3 (21)
7.	Bhavana Umanath and A.N. Santosh Kumar (2018). Enterprise Risk Management in Small And Medium Enterprises-A Review, International Journal of Mechanical and Production Engineering Research and Development, vol. 8(4), pp. 16-19.
8.	Uthappa M.M. and A.N. Santosh Kumar (2018). The Influence of Technological factors governing Project Team Motivation in Electronics Manufacturing Services Organizations-A Review, International Journal of Multidisciplinary Research Review, vol 1 (38), pp. 6-9
9.	B.M. Vinay Kumar, H. Ananthan, K.V.A. Balaji (2018). Experimental studies on utilization of recycled coarse and fine aggregates in high performance concrete mixes, Alexandria Engineering Journal, vol. 57(3), 1749-1759
10.	Tilak S.R., K. Chandrashekara, H. Yogish and A.M. Mahesha (2018). Investigation of Effect of Injection Pressure on Performance and Emission Characteristics of Composite Oil Biodiesel on DI CI Engine, International Journal of Mechanical and Production Engineering Research and Development, vol. 8(1), 1287-1298
11.	Md. Nadeem, K. Chandrashekara, Hemanth B & Yogish H (2018). Effect of MWCNT and other fillers on Mechanical properties of Epoxy Based Hybrid Composites for Elevated Temperature Application, International Journal of Innovative Research In Technology, vol.4 (10), 22-26
12.	Suman H.R., H. Yogish and Rangaswamy (2018). Preventive Maintenance of Utility Equipments at MANMUL, Gejjalagere, Mandya, International Research Journal of Engineering and Technology, vol. 5 (8), 847-855
13.	Dayananda Murthy T, H. Yogish and Rangaswamy (2018). Preventive Maintenance and Root Cause Analysis of Sealed Quench Furnace in Axle Heat Treatment Line, vol. 5 (8), 900-904
14.	Tilak S.R., K. Chandrashekara, H. Yogish and S.V. Channapattana (2018). Experimental investigation on dairy scum biodiesel on CI DI Engine Performance and pollutant Characteristics at different injection pressures, International Journal for Research in Engineering Application & Management, vol. 4(7), 470-477
15.	Ravi K.S. and Santosh Kumar A.N. (2018). A study of Formal Adoption of Human Resource Management Practices and Size of Small and Medium Sized Enterprises with Special reference to Bengaluru and Mysuru Regions, International Journal of Engineering and Science, vol. 8 (1), 10-13.
16.	Vinay K.B. and Santosh Kumar A.N. (2018). E-Learning Initiatives in Technical Education: India’s Perspective, International Refereed Journal of Engineering and Science, vol. 7 (2), 12-15.
17.	Sandesh K.S., Mahesh.V.M. and Muralidhara B.K. (2018). Review on Recent Advancements in the Field of Reinforced Epoxy Nanocomposites, International Journal Of Trend In Scientific Research And Development, vol. 2 (6), 570-574
18.	Naveen Kumar A., V.M. Mahesh and G. Mallesh (2018). Mechanical Characterization of Fiber Reinforced Glass Epoxy Hybrid Composite, International Journal of Engineering Research in Mechanical and Civil Engineering, vol 3 (2), 78-83
19.	Neetha K, Ajith G Hegde, Manjunatha B, Srinivas T.R. (2018). Method Study on laboratory Reagents’ consumption in Tertiary Healthcare firms to increase Productivity, International Journal of Mechanical and Production Engineering, vol. 6(6), pp. 62-66
20.	Bharathi Dharmanna Nail, Pavankumar Hugar and S Prabhuswamy (2018). Design and Implementation of PLC Based System to Generate History Card for Ta Shop, International Journal of Advances in Scientific Research and Engineering, vol. 4 (8), 11-14

Journal Publication 2017

Sl No.	Publication
1.	B.M. Vinay Kumar, H. Ananthan, K.V.A. Balaji (2017). Experimental studies on cement stabilized masonry blocks prepared from brick powder, fine recycled concrete aggregate and pozzolanic materials, Journal of Building Materials, vol. 10, 80-88
2.	B.M. Vinay Kumar, H. Ananthan, K.V.A. Balaji (2017). Experimental Studies on Utilization of Coarse and Finer fractions of Recycled Concrete Aggregates in Self Compacting Concrete Mixes, Journal of Building Materials, vol. 9, 100-108
3.	Yogesh M and Hari Rao A.N (2017). Manufacturing rocess of Polymer Matrix Composites with Different Description Process, International Journal of Innovative Research in Science, Engineering and Technology, vol. 6(15), 46-55.
4.	G. Mallesh and Manjunatha H.S. (2017). Investigations on Microstructure and Mechanical Properties of TiB2 Reinforced Aluminum Matrix Composites, International Journal of Engineering Sciences &Management, ICAMS, 96-106
5.	G. Mallesh, Paramesha M, Pradeepkumar V.G. (2017). Optimization Studies on Tribological Characteristics of CSP and GGBS Filled Glass – Epoxy Composites, Global Journal of Engineering Science and Researches, ICAMS, 50-59
6.	G. Mallesh, Pradeep Kumar V.G. (2017). Mechanical Characterization of CSP and GGBS Filled Glass – Epoxy Composites, Global Journal of Engineering Science and Researches, ICAMS, 15-24
7.	G. Mallesh, Suresh Kumar S (2017). Effect of Shot Peening on Mechanical and Wear Properties of AISI1018 and AISI 304 Steel by using Wheel Blast Shot Peening Machine. International Journal of Engineering Sciences & Management Research, ICAMS, 11-18
8.	Rudramurthy, K.Chandrashekara, G. Mallesh (2017). Development of Asbestos Free Brake Friction Materials for Automotive Application. International Journal of Engineering Sciences & Management Research ICAMS, 1-10.
9.	S.R.Tilak, K.Chandrashekara, H.Yogish (2017). Evaluation of Performance And Emission Characteristics of Biodiesel Derived from Diary Scum oil on a Computerized C.I Engine, International Journal of Emerging Trends in Engineering and Development, vol.1, pp 119-128.
10.	S.R. Tilak, K. Chandrashekara, H. Yogish (2017). Effect of composite biodiesel of Pongamia-waste cooking oils and its diesel blends on performance and emission characteristics of CI engine, IEEE, 10.1109/ICIMIA.2017.7975641
11.	Vedavalli V., Shivakumar B.P., Yogish H (2017). A Review on Production, Performance and Exhaust Emission of Various Non-edible oil Biodiesel, International Journal for Science and Advance Research in Technology vol.3(5), 609-615
12.	Pawan A.C. and H.Yogish (2017). Break down Analysis of Vertical Machining Center (VMC 900) in Axle Housing Line by Root Cause Analysis, International Journal of Recent Trends in Engineering and Research, vol. 3(6), 56-62
13.	Ravi K.S. and Santosh Kumar A.N. (2017). A study of Association between Financial Performance and Size of small & Medium scale Industries in Mysuru and Bengaluru Region, International Journal of Engineering and Management Research, vol. 7(1), 269–271.
14.	Ravi K.S. and Santosh Kumar A.N. (2017). A study of Welfare Practices in Small and Medium Sized Enterprises in Mysore and Bangalore Region, International Journal of Modern Trends in Engineering and Research, vol. 4(2), 81–84.
15.	Ravishankar S Ulle and Santosh Kumar A.N. (2017). Strategic Implications of ISO Certification and Quality Awards on Organizational Excellence in Indian Manufacturing Sector-A Review, International Journal of Science and Research, vol. 6(2), 848–852.
16.	Ravishankar S Ulle and Santosh Kumar A.N.(2017). Understanding Obstacles to Change Towards Continuous Improvement Programs in Manufacturing Sector, International Journal of Science and Research, vol. 6(2), 1083–1087.
17.	Hina Ruqsarand S. Prabhuswamy (2017). Overview of operation and maintenance of 1350 optical management system, International Journal on recent and innovation trends in computing and communication, vol. 5(7), 354-357

Journal Publication 2016

Sl No.	Publication
1.	Niranjan Kumar V.S., M.S. Prabhuswamy, Mohanakumara K.C., Harsha D.N. (2016). Study on Production Of Bio-fertilizer from Bio-Fuel waste, International Research Journal of Engineering and Technology, vol. 3(5), 2145-2149
2.	Jayashankar N, Prabhuswamy M.S., (2016). QFD-Universal Tool: A Review, International Journal for Research in Emerging Science and Technology, vol. 3(7), 61-64
3.	Vikas B.M., M.S. Prabhuswamy, (2016). Breakdown Analysis and Performance Improvement of Powder Packing Machine, International Journal of Recent Trends in Engineering and Research, vol. 2(7), 483-489.
4.	Chandranath M., D. Ramegowda and G. Mallesh (2016). One Step Formability Analysis of Fuel Filter Bracket using Siemens NX, International Journal of Trend in Research and Development, vol. 3(4), 194-197.
5.	Chandranath M, G. Mallesh and D. Ramegowda (2016). Designing of Punch and Die for Blanking, Forming and Bending Press Tools to Manufacture Fuel Filter Bracket Component using Finite Element Method, International Journal of Trend in Research and Development, vol. 3(4), 227-232.
6.	Yogesh M, Hari Rao A.N., (2016). Solid particle erosion response of fiber and particulate filled polymer based hybrid composites: A Review, International Journal of Engineering Research and Applications, vol. 6(1), 25-39.
7.	Sathish Kumar N and H. Yogish (2016). Preventive Maintenance and Breakdown Reduction of Critical Machine, International Research Journal of Engineering and Technology, vol.3(6), 1–7.
8.	Naveen K.J. and H. Yogish (2016). Preventive Maintenance and Root Cause Analysis of Soham Pretreatment Washing Machine in Axle Assembly Line, International Journal of Recent Trends in Engineering and Research, vol. 2(7), 373-377.

CONFERENCE PUBLICATIONS

2021-2016

Conference Publication 2021

Sl No.	Publication
1.	Ayush Ranjan, Amabti Rakshith, Nachiketh M.S., Abhinandan M.S., S.G. Channabasavanna, The Role of Computer Integrated Manufacturing in Fighting the COVID-19 Pandemic, 5th International Conference on Advanced Research in Mechanical, Materials and Manufacturing Engineering (ICAMMME-2021), REVA University, Bengaluru, Karnataka, July 9-10, 2021.
2.	Pruthvi C, Surajgouda Policepatil, Srinidhi Ramachandracharya, Dynamic Analysis of Electric Train Bogie using MATLAB Simulink, The First Biennial International Conference on Hybrid and Electric Automotive Technologies, PES University, Bengaluru, 29-30 October, 2021
3.	S.G. Channabasavanna, Niranjan Y. C., Pavankumar R, Shashank M, T Venkate Gowda, Ajay Kumar K., Application of 3D Concrete Printing in Construction of Isolation Wards and Quarantine Shelters, Indo- Korean workshop on ‘Multi-Functional Materials for Extreme Loading (MFMEL 2021), IIT Madras, Chennai. 22-24 February 2021 (ISBN: 978-93-91255-05-3)
4.	Niranjan Y.C., S.G. Channabasavanna, Shankar Krishnapillai, Velmurugan R., The Unprecedented Role of 3D Printing in Fighting the Covid-19 Pandemic: A Comprehensive Review, Indo- Korean workshop on ‘Multi-Functional Materials for Extreme Loading (MFMEL 2021), IIT Madras, Chennai. 22-24 February 2021 (ISBN: 978-93-91255-05-3).
5.	N. Jayananda, Nikhil M, Shreyas P.B., Ananya T.R., S.G. Channabasavanna, Prabodh Sai Dutt R, T Venkate Gowda, Low-Cost Automatic Hand Sanitizer Dispenser: Developed and Dispatched Against the COVID-19 Pandemic in India, National Conference on Emerging Trends in Mechanical Engineering (NCETME-2021), Reva University, Bengaluru 28-29 May 2021

Conference Publication 2020

Sl No.	Publication
1.	B.S. Suresh, C Prithvi , Srinidhi Ramachandracharya, “Modal analysis of FIAT Bogie of LHB railway coach”, First International Conference on Advanced Light-weight Materials and Structures (ICALMS 2020). 6-7 March , 2020
2.	Bhavana Umanath and A.N. Santosh Kumar, “Risk Maturity Model Framework for Enterprise Risk Management– A Review.” 2nd International Conference on Advances in Mechanical Engineering Sciences (ICAMES-2K20), PES College of Engineering, Mandya, Karnataka, 28-29 Feb, 2020
3.	Uthappa M.M. and A.N. Santosh Kumar “Impact of Motivational Factors on Project Team Performance.” 2nd International Conference on Advances in Mechanical Engineering Sciences (ICAMES-2K20), PES College of Engineering, Mandya, Karnataka, 28-29 Feb, 2020.
4.	Pradeep Kumar V.G. and G Mallesh “Optimization of Asymmetric Spur Gear tooth” International conference on Recent trends in Science and Technology. ATME College of Engineering, Mysuru. 17-18 June, 2020.
5.	Pradeep Kumar V.G., Manjunath H.S. and G Mallesh “Mechanical Characterization of Aluminium TiB2Metal matrix Composites by In-Situ Method” International conference on Recent trends in Science and Technology. ATME College of Engineering, Mysuru. 17-18 June, 2020.
6.	S.G. Channabasavanna, Abhinandan M.S., Chandan Rajendra, T. Venkate Gowda, Akshay P.C., Raghavendra D., “Improper Disposing of COVID-19 Facemasks: A Potential Microsplastic Pollution”, National Conference on Advances in Civil Engineering, East West Institute of Technology, Bangalore, 23-24 December, 2020
7.	Mahesh V.M. “Effect of wear properties on coconut shell powder filled eco-friendly brake pad composite material using Taguchi method”, Second international conference on advanced materials & technology (ICMAT-20), SJCE, Mysuru, 16-18 January 2020
8.	Mahesh V.M. “Drone with Integrated System for Public Safety – God’s eye the savior”, 6th National Conference, G. Madegowda Institute of Technology, 15th May 2020
9.	Rudramurthy, Development of Asbestos Free Brake Friction Materials for Automotive Application, Second international conference on advanced materials & technology (ICMAT-20), SJCE, Mysuru, 16-18 January 2020

Conference Publication 2019

Sl No.	Publication
1.	Karthik Hebbar A, Prithvi C, Srinidhi Ramachandracharya, “Analytical Modeling of Railway Suspension System using MATLAB Simulink”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM), 22-23 March, 2019
2.	Prithvi C, Srinidhi Ramachandracharya, Karthik Hebbar A. “Vibration Analysis of Railway Wagon Suspension System for Improved Ride Quality using MATLAB Simulink”, 6th International Conference on Production and Industrial Engineering (CPIE 2019) 8-10 June, 2019.
3.	Bhavana Umanath and A.N. Santosh Kumar “Enterprise Risk Management Framework for Small and Medium Enterprises.” International Conference on Advances in Mechanical Engineering & Management (ICAMEM-2019), Vidyavardhaka College of Engineering, Mysore, Karnataka, 22-23 March, 2019
4.	Pradeep Kumar V.G., G Mallesh, Paramesha M and Pavan Kumar R “Study on Mechanical Characteristics of CSP filled Glass Epoxy Composites”, International Conference on Advances in Mechanical Engineering & Management. VVCE, Mysuru. 22- 23 March, 2019.
5.	Pradeep Kumar V.G. “Design, Development and Optimization of Asymmetric Spur gear drives” International Conference on Mechanical Engineering Design. SSN College of Engineering, Chennai. 25-26 April, 2019.

Conference Publication 2018

Sl No.	Publication
1.	Bhavana Umanath and A.N. Santosh Kumar “Importance of Enterprise Risk Management in Corporate Governance – A Review.” 8th International Conference on Innovation, Entrepreneurship and Economy for Sustainable Development (ICIEESD’18), Sri Sai Ram Institute of Management Studies, Chennai, 10-11 October 2018.

Conference Publication 2017

Sl No.	Publication
1.	S.R. Tilak, K. Chandrashekara, H. Yogish. Effect of composite biodiesel of Pongamia—waste cooking oils and its diesel blends on performance and emission characteristics of CI engine, International Conference on Innovative Mechanisms for Industry Applications (ICIMIA), IEEE Bengaluru, 21-23 Feb. 2017

Patents

Sl. No	Year	Title of the patent Published	Application /Patent No.	Name of Inventors	Filed / Published Date (dd/mm/yyyy)
1	2020	A Smart Bidet With Integrated Minimal Contact Soft Foreign Object Assembly for Cleaning the User Rectal Areas	IP-4609-IN-20210322-PA-2020	Dr. Mahesh V.M.	??
2.	2020	Autonomous Vehicle as a Medical Assistant – Fighter for COVID 19	IP-4609- IN-20210322-PA-2020	Dr. Mahesh V.M
3.	2020	Autonomous Drone with Integrated System for Public Safety	IP-4608-IN-20210321- PA-2020	Dr. Mahesh V.M

About Department

Message from HOD

Dr. R Ravishankar Associate Professor and Head of Dept. me.rr@sjce.ac.in +919900107507

Vision

Mission

Short Term

Long Term

OBE Administration

Sl. No.

Category

Designation

Name of the Person

1

The Dean(s) of the Faculties

Ex-Officio Member

DR. B Manojkumar

Dean (Engineering & Technology)

DR. S B Kivade

2

Head of the Dept.

Chairperson

DR. R. Ravishankar

3

All Professors of the Department

Members

1

Dr. A.N. Santosh Kumar

2

Dr. G Mallesh

4

Two Senior Associate Professors of the concerned Department by rotation

Members

1

2

Sri P Prasad

Dr. T Manjunatha

5

One Senior Assistant Professor of the concerned Department by rotation

Member

1

Sri Arun Y C

Asst. Professor,

Department of Mechanical Engineering,

SJCE, Mysuru

Mobile No. 7829395884

arunycsjce@gmail.com

arunyc@jssstuniv.in

6

One External Subject Expert from any reputed Academic / Research Institution / Other Universities nominated by the Academic Council

Member

1

Dr. Ezhil Vannan

Professor, Department of Mechanical Engineering,

Malnad College of Engineering, Hassan – 573202

Mobile No. +91 98455 75450

Email ID: evs@mcehassan.ac.in

7

One External subject expert from any reputed Academic/Research Institutions/other Universities nominated by the Vice Chancellor upon recommendation by the Dean of respective faculty.

Member

1

Dr. V V Katti

Professor,

Department of Mechanical Engineering

SDM College of Dharwad

+91 9480587316

Email ID: katti.vadiraj@gmail.com

8

Two external members from concerned industry/ Government Departments/ Public Sector undertakings/ allied area relating to placement, nominated by the Academic Council upon recommendation by the Dean of respective faculty.

Members

1

Mr. Navaneetha Navakana

Vice President and HOD – Chassis Systems and Processes,

Mercedes Benz India (R&D) India Private Limited,

Embassy Crest Phase 1,

Near Sathya Sai Hospital,

Whitefield Road, Bengaluru 560066

Phone: +91 80 6149 4500

Mobile: +91 98450 82820

e-mail: navaneetha.navakana@daimler.com

Dr. R Ravishankar
Associate Professor and Head of Dept.
me.rr@sjce.ac.in
+919900107507